Thermo Savant SPD121P SpeedVac Concentrator
The Thermo Savant SPD121P SpeedVac Concentrator is a versatile unit that can be used with a variety of different solvents, including acetone, chloroform, ethyl acetate, hexane, and methylene chloride, as well as some additional solvent combinations. The Thermo Savant SPD121P is constructed with a deep aluminum PTFE coated chamber and a radiant glass safety cover that applies radiant IR heat to samples, thus reduces drying time. The two valve manifold has a built-in automatic bleeder valve. Drying times can be adjusted and temperature settings from 35°C to 80°C, adjustable in 5°C increments. Runs can be either manual or auto timed with timer settings from 1 minute to 10 hours. Endpoint mode terminates run when pre-set vacuum level is reached and the built-in vacuum gauge and vacuum display allow users to monitor vacuum level.
All of the equipment we sell is used and reconditioned. Our technicians test the performance of all centrifuges and make sure the rotating assembly is properly balanced; the bearings, seals and gaskets on the spindle assembly are in good shape; and the controls work properly. If the centrifuge is refrigerated we also test to make sure that the machine reaches and hold temperature properly. All tolerances are measured and the exterior and interior of all units are fully cleaned. If the unit is being purchased with a rotor we test the rotor/centrifuge combination together.
Click Here to see the Thermo Savant SPD121P Speedvac on the American Instrument Exchange YouTube channel.
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.
American Instrument Exchange, Inc.
1023 Western Avenue
Haverhill, MA 01832