PHCbi Cell-IQ Series Tri-gas Cell Culture Incubator

2026-04-17T05:58:15-04:00

Vendor: PHCbi
Type: Incubators
Price: 6500.00

PHCbi Cell-IQ Series Tri-gas Cell Culture Incubator

The PHCbi Tri-gas incubators optimize mammalian cell cultures through variable O₂ control to better mimic in vivo conditions for regenerative medicine and stem cell applications. The MCO-170MP-PA CO₂ /O2 /N2 incubator allows you to achieve more accurate results by culturing your cells at physiological oxygen levels.

This model includes the optional high speed decontamination system that utilizes hydrogen peroxide (H₂O₂) vapor to clean the incubator chamber in under three hours. The system safely and efficiently decontaminates with a 100% kill rate of major contaminants.

PHCbi Cell-IQ Series Tri-gas Cell Culture Incubator features

Model MCO-170MP-PA

Connections for CO2/O2/N2

Capacity: 5.7 Cu. Ft.

Temp range: ambient + 5°C to 50°C

90-day warranty

The solid zirconia O₂ sensor allows precise control of oxygen levels in order to simulate in vivo conditions similar to a cell's native surroundings. The MCO-170MP-PA Tri-gas incubator reproduces low oxygen concentrations that are often found in tissues, organs and pathogenic tissues.

The PHCbi inCu-saFe combines the germicidal properties of elemental copper with the corrosion and discoloration resistance of stainless steel to deliver passive contamination control throughout the chamber interior. The SafeCell UV lamp provides safe, active and passive contamination control of circulated air and the humidity water reservoir. SafeCell scrubs and decontaminates circulated chamber air without affecting cell cultures in situ.

Superior temperature uniformity and accurate temperature levels are achieved by the microprocessor controlled Direct Heat and Air Jacket System, which functions under microprocessor control.

The high contrast color LCD display allows for easy, touchscreen use even with gloved hands. The control panel interface allows for easy programming of temperature, CO₂, O₂ and N2 ,along with other internal conditions of your incubator. A standard USB port simplifies the storage or transfer of logged data. Proprietary IR2 sensor achieves ultrafast CO₂ recovery without overshoot, even following multiple door openings.

CLICK HERE to see the PHCbi Cell-IQ Series tri-gas cell culture incubator on our YouTube channel

PHCbi Cell-IQ MCO-170MP-PA testing

Most of our equipment is used and reconditioned. All of our incubators are used and reconditioned. We test incubators using a calibrated digital data logger to verify the accuracy of temperature controls and readouts. We replace any hardware or parts as is necessary and clean all incubators thoroughly prior to shipment.

PHCbi Cell-IQ MCO-170MP-PA pictures

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment.

We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.

PHCbi Cell-IQ MCO-170MP-PA Tri-gas Cell Culture Incubator – specifications

External dimensions | 24.4" W x 28.7" D x 35.6" H
Interior dimensions | 19.3" W x 20.6" D x 26.2" H
Capacity | 5.7 cu.ft.
Temperature range | Ambient + 5° to 50°C
CO2 control range | 0% to 20%
Oxygen control range | 1-18% & 22-80%, ±0.2%
Electrical requirements | 120V, 60Hz, 16A
Weight | 170 lbs

For inquiries about the PHCbi Cell-IQ MCO-170MP-PA Tri-Gas Cell Culture Incubator, please give us a call at 978-521-2221, or fill out the form on this page.

PHCbi Cell-IQ MCO-170MP-PA Tri-gas Cell Culture Incubator frequently asked questions (FAQs)

What makes a tri-gas incubator different from a standard CO₂ incubator?

Unlike standard CO₂ incubators, tri-gas models allow active oxygen (O₂) control in addition to CO₂ and temperature. This enables researchers to simulate hypoxic or physiological oxygen levels found in tissues, improving experimental accuracy and reproducibility.

How does the incubator control oxygen levels so precisely?

The PHCbi Cell-IQ MCO-170MP-PA Tri-Gas Cell Culture Incubator system uses a solid zirconia oxygen sensor, which allows accurate and stable O₂ measurement and control. This enables researchers to maintain low oxygen environments that closely mimic in vivo cellular conditions.

What gases are required to operate this incubator?

Tri-gas incubators typically require:

CO₂ (carbon dioxide)

O₂ (oxygen)

N₂ (nitrogen, for oxygen displacement/control)

Proper gas supply and regulation are essential for maintaining stable chamber conditions. Please contact our sales team for questions about this specific model.

How easy is the incubator to clean and maintain?

The Cell-IQ Series is designed for simplified maintenance, featuring:

Rounded interior corners for easy wipe-down

Removable shelves and components

Automated decontamination cycles (UV and/or high heat)

These features reduce downtime and help maintain sterile conditions with minimal effort.

Can the PHCbi Cell-IQ Series Tri-gas Cell Culture Incubator support hypoxia or low-oxygen research?

Yes—this is one of its primary advantages. The tri-gas configuration allows researchers to precisely control low oxygen levels, making it ideal for hypoxia studies and physiologically relevant cell culture models.