Fisher Dual Chamber Hybridization Incubator

2024-07-29T12:17:40-04:00

Vendor: Fisher
Type: Incubators
Price: 795.00

Fisher Isotemp 13-247-30Q Dual Chamber Hybridization Rotisserie Incubator

The Fisher Dual Chamber Hybridization Incubator is designed to process nucleic and protein blots derived from hybridization procedures. Incubator heat is accurately controlled to precisely maintain the chamber temperature.

Fisher Dual Chamber Hybridization Incubator features

Capacity: 29 Cu. Ft.

Temp range: ambient + 7°C to 85°C

Rotisserie speed: 5 to 15 rpm

90-day warranty

Temperature can be set between slightly above ambient and 85°C and is easily set by simple controls on the front panel. A large, bright display shows actual temperature during operation. The incubator features keypad protection, which prevents the set temperature from being changed. This is useful when setting up a processing program where the unit will be unattended.

Programmable offset temperature to compensate for the actual temperature inside a typical sample loaded into the tubes. The incubator can monitor and store the maximum deviation of the actual temperature from the set temperature.

Monitor temperature deviation and save during processing and recalled later. A separate safety thermostat limits the incubator temperature to approximately 95°C in the event of a temperature controller failure. An indicator on the front panel shows when this condition exists.

A rotisserie holds the sample tubes and rotates to provide membrane coverage. Rotisserie rotation speed can be varied by a knob on the front panel. A jog control permits rotating the rotisserie in steps to insert and remove tubes.

The incubator has a glass door for observing samples during processing. Interior surfaces are stainless steel for high durability and low maintenance.

Testing

This rotisserie incubator is used and reconditioned. Our technicians test incubators using a digital temperature probe to verify the accuracy of temperature controls and readouts. We replace any hardware or parts as is necessary and clean all incubators thoroughly prior to shipment.

Pictures

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment.

We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after testing and cleaning.

Fisher Isotemp 113-247-30Q Dual Chamber Hybridization Incubator – specifications

Internal dimensions | 18”W x 20”D x 40.75”H
Temperature range | ambient + 7°C to 85°C
Rotisserie speed | 5 to 15 rpm

Tube capacity

20 @ 35x300 mm
40 @ 35x40 mm

Electrical requirements | 115 V, 60 Hz
Weight | 105 lbs

For inquiries about the Fisher Isotemp 13-247-30Q Dual Chamber Hybridization, please give us a call at 978-521-2221, or fill out the form on this page.