Item 2080J EVAP - Buchi R-215 rotary evaporator
Buchi R-215 rotary evaporator system
The Buchi R-215 rotary evaporator “rotavapor” system includes the R-215 tower, V-855 vacuum controller, B-491 heating bath, and V-700 vacuum pump. The Buchi R-215 rotavapor features a display of vapor temperature and rotation speed for precise monitoring as well as increased reproducibility. Additionally, the continuous vapor duct prevents cross contamination. Rotation speeds are adjustable from 20 to 280rpm.
The Buchi V-855 vacuum controller a large graphic display and easy operation with a rotary knob allowing for vacuum adjustment. The V-855 allows for vacuum regulation to a specified set point and features a library with 43 specified solvents. The EasyVac function is an automatic process-control based on vapor pressure detection. Gradient programming for special distillation task is also possible with the V-855.
The Buchi B-491 heating bath can be used as either a water bath to 100°C or oil heating bath to 180°C. Simple knob controls allow for temperature setting as well as selection between water and oil function. The B-491 can accept flasks up to 4L.
The Buchi V-700 features a brushless DC motor with motor speed of 1600rpm. The 1.8m3/hour flow rate produces a noise level of between 40 and 52dBA. All components that come in contact with solvent vapors are made of PTFE or other resistant materials. An absolute vacuum of 10mbar can be achieved with the V-700 vacuum pump and V-855 vacuum controller.
All of our equipment is used and reconditioned. Our technicians test all equipment to confirm that it operates properly and to the manufacturer’s specifications. While we can’t test for a specific analytical application, we will do our best to simulate the conditions under which the equipment will be run. If you have particular testing requirements or requests please let us know and we’ll work with you to make sure these requirements are addressed during testing.
Click Hereto see the Buchi R-215 rotary evaporator systemon the American Instrument Exchange YouTube channel.
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.
American Instrument Exchange, Inc.
1023 Western Avenue
Haverhill, MA 01832