< Prev GLOVE BOXES
Item 2743A GLOVE BOX - Germfree Glovebox Isolator
Germfree Laminar Flow Glovebox Isolator
Germfree’s Compounding Aseptic Containment Isolators are constructed of high-quality, all-welded stainless-steel with a pharmaceutical grade finish. The unit incorporates an integrated height-adjustable stand with locking cleanroom grade casters. The ergonomic, stainless steel sliding tray inside the airlock is designed to eliminate reaching strains. Further, the stainless-steel interior work area trays are removable and are designed to slide over one another. This facilitates easy cleanup under the work deck. The extra-large oval gloveports incorporate a two-part sleeve/glove system that allows for use of most types and sizes of commercially available gloves. Glove changes can be made while maintaining containment, to enhance personnel protection.
The Laminar Flow Glovebox Isolators (LFGI) use HEPA filters to provide the highest level of operator and product protection. The supply HEPA filter provides laminar flow air, which bathes the entire work area. The exhaust HEPA filter handles all air exiting the LFGI. Additionally, two HEPA filters located inside the HEPA Purge Airlock filter the purged air. Operator and product protection from gas and fumes are NOT provided by HEPA filtration, but limited protection from gas and fumes can be provided by venting or ducting. The LFGI can be configured for no recirculation and total exhaust of all air exiting the work area.
CLICK HERE to see the Germfree LFGI on our YouTube channel
Germfree’s LFGI features two sealed 2-door airlocks that maintain complete environmental separation between work area and ambient conditions. It also has separate trash and sharps tubes with easily removable seals/stoppers to maintain work containment; lock-out handle requiring key for access to work area; digital pressure readout with low pressure alarm for work area; hydraulic-assist, height-adjusting stand that offers a full 10” range in height, allowing operators to sit or stand comfortably; a two-apart sleeve/glove system that allows the use of most types and sizes of commercially available gloves for better dexterity and tactility; gloveports with a 2” arm rest to facilitate operator comfort and reduce fatigue; and an integrated foot rest.
Our technicians test all equipment to confirm that it operates properly and to the manufacturer’s specifications. While we can’t test for a specific analytical application, we will do our best to simulate the conditions under which the equipment will be run. If you have particular testing requirements or requests, please let us know and we’ll work with you to make sure these requirements are addressed during testing.
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.
Germfree Laminar Flow Glovebox Isolator - specifications
|External dimensions||90”W (74” at base) x 32”D x 80”H|
|Interior dimensions||70.5”W x 24.5”D x 29”H|
|Transfer chamber dimensions||16”W x 13.5”D x 14.25”H|
|Electrical requirements||115V, 60 Hz|
For inquiries about the Germfree Laminar Flow Glovebox Isolator, please give us a call at 978-521-2221, or fill out the form on this page.
American Instrument Exchange, Inc.
1023 Western Avenue
Haverhill, MA 01832