2569I FREEZER Sanyo MDF-S51VA Ultra low
to request information & pricing for item 2569I_FREEZER
American Instrument Exchange
Contact us for all your used lab equipment needs
1023 Western Ave.
Haverhill, MA 01832
Sanyo MDF-U51VA ultra-low freezer
- Temperature range: -50°C to -86°C
- 18.3 cubic foot storage capacity (519L)
- Single exterior door, two interior doors
- 90 day warranty
The Sanyo V.I.P. series upright ultra-low freezers are designed for critical low temp, long term storage and preservation of biologics, specimens, reagents, and components as well as testing of various types. The model MDF-U751VA is a 115V, 16 amp electrical configuration with 18.3 cubic feet of storage capacity. The Vacuum Insulation Panel (V.I.P.) technology creates a high density storage chamber with high R-values, reduced wall thickness, minimal overall footprint and added structural stability to the cabinet. The dual interior doors are insulated and improve both temperature uniformity and temperature recovery after the exterior door has been opened. The redesigned refrigeration system also reflects Sanyo’s commitment to creating more environmentally friendly products, with the higher operating efficiency not only reducing your lab’s carbon footprint but also lowering energy costs. This machine incorporates environmentally safe CFC/HCFC-free refrigerants.
Click Here to see the Sanyo ultralow freezer on the American Instrument Exchange YouTube channel.
The trademarked Easy-In / Easy Out outer door latch closes smoothly with a single-hand action over a cam action bearing and the exterior door can be secured with independent padlock (sold separately). This freezer is mounted on high impact recessed casters. Multiple access ports permit the use of independent monitoring probes, instrumentation, or liquid CO2 back-up system injection tubes. Internal voltage and power management systems assure component protection and best operation efficiencies. Built-in seismic restraints can be used to secure the freezer to the building superstructure should local building codes require.
All of the equipment we sell is used and reconditioned. Our technicians use calibrated digital chart recorders to verify the accuracy of temperature controls and readouts of all freezers, making sure that the units hold temperature to within the manufacturer specified tolerance. We replace any hardware or parts as is necessary and if needed replace refrigerant. We clean all freezers thoroughly prior to shipment.
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.