IEC Mdl EXD explosion proof

Item: 1296 CENTRI

  • Sale
  • Fully tested
  • Thoroughly cleaned
  • Ships from Haverhill, MA
90-Day Warranty




Contact Us

Call 978-521-2221
to request information & price


American Instrument Exchange
1023 Western Ave.
Haverhill, MA 01832

Phone: 978-521-2221
Fax: 978-521-8822

Email: info@americaninstrument.com

Shipping Policy

IEC Model EXD floor model centrifuge

  • Maximum Capacity: 6 x 1L
  • Maximum speed: 5,200 rpm
  • 90 day warranty

The Thermo IEC Model EXD floor model centrifuge is a high-capacity, heavy-duty, reliable machine designed specifically for laboratories with flammable vapors present during centrifugation. The IEC EXD can be used in Class 1, Group D hazardous environments which include atmospheres containing gasoline, petroleum, naphtha, benzol, lacquer, solvent vapors, or natural gas. The IEC EXD features a time, four swivel casters for easy maneuverability, a dynamic electrical braking system, and a timer allowing for 2 to 120 minute timed runs as well as an unlimited run time option. The control housing and motor are connected through explosion proof conduit fittings so that vapors can’t reach the electrical components, thus avoiding spark-generated fires or explosions.  

IEC Model EXD floor model centrifuge

Speed Range

1,200 to 5,500 rpm

Set Time

2 to 120 minutes, or continuous run setting

Dimensions (HxWxD)

12” x 14.5” x 23”

Electrical requirements

120V, 50/60Hz, 6.9 amp

All of our equipment is used and reconditioned. Our technicians test the performance of all centrifuges and make sure the rotating assembly is properly balanced; the bearings, seals and gaskets on the spindle assembly are in good shape; and the controls work properly. If the centrifuge is refrigerated we also test to make sure that the machine reaches and hold temperature properly. All tolerances are measured and the exterior and interior of all units are fully cleaned.  If the unit is being purchased with a rotor we test the rotor/centrifuge combination together. 

Our technicians inspect all rotors, including any buckets, gaskets and overspeed disks. Fixed angle rotors are closely inspected for body integrity; swinging bucket rotors supplied with buckets are checked for proper weight distribution. When possible we run each rotor in a compatible centrifuge to make sure the rotor spins properly.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.

Please call 978-521-2221 or email us today for pricing and additional information regarding the IEC Model EXD floor model centrifuge.