Thermo Savant SPD121P

Sorry, this unit has just been sold. Please contact us for alternatives.

Item: 1337P CENTRI


All products ship from our 30,000 sq. ft. Haverhill, MA warehouse

Contact Us

Call 978-521-2221
to request information & pricing for item 1337P CENTRI

90-Day Warranty

American Instrument Exchange
Contact us for all your used lab equipment needs

1023 Western Ave.
Haverhill, MA 01832

Phone: 978-521-2221
Fax: 978-521-8822


Shipping Policy

Thermo Savant SPD121P SpeedVac Concentrator

  • 64 x 1.5mL capacity
  • Temp range: 35°C to 80°C
  • 90 day warranty

The Thermo Savant SPD121P SpeedVac Concentrator is a versatile unit that can be used with a variety of different solvents, including acetone, chloroform, ethyl acetate, hexane, and methylene chloride, as well as some additional solvent combinations. The Thermo Savant SPD121P is constructed with a deep aluminum PTFE coated chamber and a radiant glass safety cover that applies radiant IR heat to samples, thus reduces drying time. The two valve manifold has a built-in automatic bleeder valve. Drying times can be adjusted and temperature settings from 35°C to 80°C, adjustable in 5°C increments. Runs can be either manual or auto timed with timer settings from 1 minute to 10 hours. Endpoint mode terminates run when pre-set vacuum level is reached and the built-in vacuum gauge and vacuum display allow users to monitor vacuum level.

Click Here to see the Thermo Savant SPD121P Speedvac on the American Instrument Exchange YouTube channel.

All of our equipment is used and reconditioned. Our technicians test the performance of all centrifuges and make sure the rotating assembly is properly balanced; the bearings, seals and gaskets on the spindle assembly are in good shape; and the controls work properly. If the centrifuge is refrigerated we also test to make sure that the machine reaches and hold temperature properly. All tolerances are measured and the exterior and interior of all units are fully cleaned. If the unit is being purchased with a rotor we test the rotor/centrifuge combination together.

Our technicians inspect all rotors, including any buckets, gaskets and overspeed disks. Fixed angle rotors are closely inspected for body integrity; swinging bucket rotors supplied with buckets are checked for proper weight distribution. When possible we run each rotor in a compatible centrifuge to make sure the rotor spins properly.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.

Please call 978-521-2221 or email us today for pricing and additional information.