to request information & pricing for item 1264K CENTRI
Beckman Allegra X-14 Benchtop Centrifuge
- Max capacity: 3L
- Brushless induction motor
- Max RCF: 11,400 x g (fixed angle)
- 10 user-defined programs
- 90-day warranty
The Allegra X-14 is microprocessor-controlled, providing interactive operation. The instrument design features a brushless asynchronous motor, automatic rotor identification system, program memory that enables repeated run conditions, temperature control system, and a choice of acceleration and deceleration rates. User messages alert the operator to conditions that may need attention.
The Allegra X-14 centrifuge is intended for the separation of components through the use of relative centrifugal force. It is designed to separate human samples, including blood and other body fluids, for processing, analysis, and in vitro diagnostic testing, as well as nonhuman body samples and chemicals, including industrial and environmental samples.
CLICK HERE to see the Beckman Allegra X-14 benchtop centrifuge on our YouTube channel
The centrifuge housing is made of sheet steel and structural foam and is finished with acrylic baking enamel. The aluminum and structural foam door is secured to the housing by solid hinges. A window in the center allows strobe viewing. When the door is closed, the locking system engages. The door is locked when a run is in progress and can be opened only when the rotor is stopped and the LED next to the DOOR key is lit. The aluminum rotor chamber is coated with epoxy enamel for corrosion resistance and sealed by a foam gasket.
The asynchronous direct-drive motor is brushless for clean, quiet operation. The resilient suspension ensures that loads will not be disturbed by vibration and prevents damage to the drive shaft if an imbalance occurs during centrifugation. Maximum acceleration and deceleration may be selected to allow fast processing of samples; alternately, delicate gradients may be preserved using slower acceleration and deceleration.
All of our equipment is used and reconditioned. Our technicians test the performance of all centrifuges and make sure the rotating assembly is properly balanced; the bearings, seals and gaskets on the spindle assembly are in good shape; and the controls work properly. If the centrifuge is refrigerated, we also test to make sure that the machine reaches and hold temperature properly. All tolerances are measured and the exterior and interior of all units are fully cleaned. If the unit is being purchased with a rotor, we test the rotor/centrifuge combination together.
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.
Beckman Allegra X-14 Benchtop Centrifuge - specifications
|Maximums - fixed angle rotor||10,200 rpm; 11,400 x g|
|Maximums – swinging bucket rotor||4,300 rpm; 4,300 x g|
|Timer range||Up to 99 hrs. 59min., hold, pulse|
|Dimensions||30”W x 24.5”D x 13.5”H|
|Electrical Requirements||120 V, 60 Hz|
Please call 978-521-2221 or email us today for pricing and additional information regarding the Beckman Allegra X-14 Benchtop Centrifuge.