All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
Thermo Scientific Savant SC250EXP SpeedVac Vacuum Concentration System
Some laboratory workflows aren't limited by centrifugation—they're limited by what happens afterward. Once DNA has been purified, peptides isolated, HPLC fractions collected, or compounds synthesized, laboratories often need to remove solvents quickly without exposing valuable samples to excessive heat or risking sample loss. That's exactly what the Thermo Scientific Savant SC250EXP SpeedVac System was designed to do.
This particular Thermo Scientific Savant SC250EXP SpeedVac System is a complete vacuum concentration package that includes the SC250 Express concentrator, microplate rotor, Thermo Scientific RVT4104 refrigerated vapor trap, and vacuum pump. Designed for both aqueous and aggressive organic solvents, the system combines centrifugal force, vacuum, infrared heating, and refrigerated solvent recovery to provide rapid, controlled evaporation for demanding pharmaceutical, biotechnology, genomics, proteomics, and analytical chemistry applications.
At American Instrument Exchange, every SpeedVac system is professionally inspected and tested before shipment. Our technicians verify chamber operation, vacuum performance, rotor function, heating controls, vapor trap refrigeration, controller operation, and overall system performance to ensure dependable operation. American Instrument Exchange offers professionally refurbished laboratory centrifuges, vacuum concentrators, SpeedVac systems, ultracentrifuges, refrigerated centrifuges, and other laboratory equipment from Thermo Scientific, Beckman Coulter, Eppendorf, and other leading manufacturers.
Features of the Thermo Scientific Savant SC250EXP SpeedVac System
Complete system includes:
SC250 Express SpeedVac concentrator
Microplate rotor
Thermo Scientific RVT4104 refrigerated vapor trap
Vacuum pump
Designed for aqueous and aggressive organic solvents
Adjustable temperature range from 45°C to 80°C in 5°C increments
Four infrared heating lamps for efficient evaporation
Dual vacuum control with RAMP and LEVEL modes to reduce sample bumping and foaming
Heated glass lid minimizes condensation and shortens drying times
Chemical-resistant vapor path with PTFE- and Kalrez®-lined components
Ideal for drug discovery, combinatorial chemistry, proteomics, genomics, metabolomics, and pharmaceutical research
90-day warranty included from American Instrument Exchange
Refurbished and tested by American Instrument Exchange
Unlike a basic centrifugal evaporator, the SC250EXP system combines a refrigerated vapor trap and programmable vacuum control, allowing laboratories to safely concentrate challenging solvents such as DMSO and DMF while helping protect the vacuum pump from solvent contamination.
Why Laboratories Choose the Thermo Scientific Savant SC250EXP
One of the biggest advantages of the SC250EXP is that it arrives as a complete evaporation system rather than a standalone concentrator. By integrating the concentrator, refrigerated vapor trap, and vacuum pump, laboratories can begin processing samples immediately without sourcing additional major components.
Researchers working with pharmaceutical compounds, combinatorial chemistry libraries, LC/MS sample preparation, peptide purification, and nucleic acid workflows also appreciate the system's intelligent vacuum management. The programmable RAMP and LEVEL vacuum modes reduce sample bumping while improving reproducibility across multiple runs.
Thermo Scientific Savant SC250EXP Common Applications
The SC250EXP SpeedVac system is commonly used for:
DNA and RNA concentration
PCR product preparation
Peptide and protein sample preparation
Drug discovery
Combinatorial chemistry
LC/MS sample preparation
HPLC fraction concentration
Oligonucleotide purification
Pharmaceutical research
Metabolomics and proteomics workflows
Its combination of controlled vacuum, infrared heating, and refrigerated solvent recovery allows laboratories to efficiently remove solvents while minimizing sample degradation and protecting heat-sensitive compounds.
Thermo Scientific Savant SC250EXP Included Components
The included RVT4104 refrigerated vapor trap condenses solvent vapors before they reach the vacuum pump, extending pump life while improving solvent recovery and laboratory safety. The integrated system is especially well suited for laboratories routinely working with organic solvents and high-throughput sample preparation.
Thermo Scientific Savant SC250EXP Specifications
Specification
Details
Manufacturer
Thermo Scientific
Model
Savant SC250EXP
Condition
Refurbished
Equipment Type
SpeedVac Vacuum Concentration System
Temperature Range
45°C–80°C (5°C increments)
Heating System
Four infrared heat lamps
Vacuum Control
RAMP and LEVEL programmable modes
Vapor Trap
Thermo Scientific RVT4104 Refrigerated Vapor Trap
Included Rotor
Microplate Rotor
Included Pump
Yes
Warranty
90 Days
Specifications compiled from Thermo Scientific manufacturer literature, technical documentation, and American Instrument Exchange product information.
Power Requirements and Shipping Considerations
The Thermo Scientific Savant SC250EXP is a complete benchtop vacuum concentration system that ships via freight because of the multiple integrated components. Laboratories should verify available bench space, electrical service, and adequate ventilation prior to installation.
American Instrument Exchange can assist with shipping coordination and installation planning to help ensure your SpeedVac system arrives safely and is ready for operation.
Refurbished Laboratory Equipment from American Instrument Exchange
Every SpeedVac system sold by American Instrument Exchange is professionally inspected and tested prior to shipment. We verify concentrator performance, heating operation, vacuum integrity, refrigerated vapor trap performance, controller functionality, and overall system reliability.
Many laboratories purchasing a vacuum concentrator are also outfitting molecular biology or analytical chemistry laboratories. We also offer professionally refurbished laboratory freezers and ultra-low freezers, laboratory incubators and biosafety cabinets to support complete laboratory build-outs.
Thermo Scientific Savant SC250EXP Service and Support
American Instrument Exchange and AIE Laboratory Services provide diagnostics, preventative maintenance, depot repair, and support for laboratory centrifuges, SpeedVac systems, vacuum concentrators, and many other laboratory instruments.
Our service team also supports refrigerated centrifuges, laboratory freezers, ultra-low temperature freezers, incubators, and biosafety cabinets to help laboratories maximize equipment uptime.
Thermo Scientific Savant SC250EXP SpeedVac System Frequently Asked Questions
What is included with this SC250EXP system?
This system includes the SC250 Express concentrator, microplate rotor, Thermo Scientific RVT4104 refrigerated vapor trap, and vacuum pump, providing a complete vacuum concentration solution.
What types of solvents can the SC250EXP handle?
The SC250EXP is designed for both aqueous samples and many aggressive organic solvents, including high-boiling solvents commonly used in pharmaceutical and combinatorial chemistry workflows.
Why is the refrigerated vapor trap important?
The refrigerated vapor trap condenses solvent vapors before they enter the vacuum pump, helping extend pump life, improve solvent recovery, and reduce maintenance requirements.
How does the RAMP vacuum mode improve sample recovery?
The programmable RAMP mode gradually applies vacuum pressure, reducing sample bumping, foaming, and solvent boil-over when concentrating sensitive samples.
Is the SC250EXP suitable for pharmaceutical laboratories?
Yes. The SC250EXP is widely used for drug discovery, combinatorial chemistry, peptide preparation, metabolomics, proteomics, and analytical chemistry applications where rapid, controlled solvent removal is required.
Is a refurbished Thermo Scientific SC250EXP a good investment?
For laboratories requiring a complete SpeedVac system, a professionally refurbished SC250EXP provides high-performance vacuum concentration capabilities at a significant savings compared with purchasing a comparable new system.
Can American Instrument Exchange service SpeedVac systems?
Yes. AIE Laboratory Services provides diagnostics, preventative maintenance, and repair support for many laboratory vacuum concentrators, SpeedVac systems, refrigerated centrifuges, and related laboratory equipment.
Click Hereto see the Thermo Savant SC250EXP SpeedVac systemon the American Instrument Exchange YouTube channel.
Testing Procedures for Used and Refurbished Laboratory Centrifuges
Ensure Quality, Accuracy, and Compliance Before Deployment
Used and refurbished laboratory centrifuges from American Instrument Exchange undergo testing procedures to ensure they meet the performance, safety, and compliance standards required in modern laboratories.
Why Testing Used Laboratory Centrifuges Is Essential
Before a centrifuge is reintroduced into a lab environment, it must be tested for:
Mechanical integrity
Rotor balance and speed accuracy
Safety system functionality
Electrical compliance
Proper testing helps extend equipment lifespan, reduce downtime, and ensure safety in high-stakes lab environments such as clinical diagnostics, biotechnology, and research applications.
Our structured testing protocol for used and refurbished centrifuges ensures equipment safety, accuracy, and longevity.
Key Testing Procedures for Refurbished and Used Centrifuges
1. Initial Visual Inspection
Check for signs of wear, corrosion, or damage to housing, lid, and control panels
Inspect power cords, plugs, and connectors for fraying or exposed wiring
Confirm that the rotor and accessories are compatible and undamaged
2. Functional Testing
Power up the centrifuge and confirm successful boot-up of digital or analog displays
Test lid lock and emergency stop mechanisms
Run initial cycles at various speeds to check for abnormal noise or vibration
3. Rotor and Speed Verification
Test all programmable speed settings to confirm consistent acceleration and deceleration
Monitor temperature, vibration, and RPM consistency throughout the cycle
Balance testing ensures smooth operation and prevents wear on internal components
4. Electrical Safety and Grounding Tests
Verify that all electrical components are properly grounded and shielded
5. Temperature Control (if applicable)
For refrigerated centrifuges, test cooling function to ensure temperature stability within set ranges
Check refrigerant levels and inspect for compressor noise or failure
6. Final Quality Assurance Checklist
Conduct a full run-through using the user interface
Document all test results
Repair and Refurbishment Protocol for Used Laboratory Centrifuges
Certified Quality from American Instrument Exchange
At American Instrument Exchange, we follow a meticulous repair and refurbishment protocol to ensure that every used laboratory centrifuge we sell. We strive for reliable performance and long-term durability—providing labs with exceptional value on high-quality pre-owned centrifuges.
Why Choose a Refurbished Centrifuge from American Instrument Exchange?
Fully tested
Backed by warranty and performance guarantee
Cost-effective alternative to new lab equipment
Environmentally responsible through equipment reuse
Supported by expert technicians with decades of experience
Step-by-Step Refurbishment Protocol
Every used centrifuge at American Instrument Exchange goes through the following comprehensive repair and refurbishment process:
1. Initial Intake & Inspection
Our technicians perform a complete visual and mechanical inspection
Evaluation of hinges, seals, gaskets, and electrical components
Any physical damage, missing parts, or wear is documented for repair
2. Cleaning and decontamination
Full internal and external cleaning using non-abrasive, disinfectant-safe products
Biological or chemical residue is decontaminated/cleaned
3. Mechanical & Electrical Repairs
Damaged or worn parts (e.g., drive motors, lid latches, rotor buckets) are replaced or repaired
Electrical components, sensors, and fuses are tested and replaced as needed
Wiring is inspected for integrity and safety per industry standards
4. Rotor & Accessory Evaluation
All rotors, buckets, and adapters are inspected for cracks, corrosion, and balance
Non-conforming components are replaced with OEM or equivalent alternatives
5. Performance Testing
Rotor speed (RPM), acceleration, and deceleration are verified
Refrigerated centrifuges undergo temperature stability testing across set ranges
6. Safety System Verification
Lid lock and interlock systems are tested for proper function
Emergency stop and imbalance detection systems are verified
Electrical safety and grounding tests are conducted
Trust the Experts at American Instrument Exchange
With over 50 years of experience in the industry, American Instrument Exchange is a trusted name for refurbished lab equipment. Our centrifuge refurbishment protocol reflects our commitment to quality, safety, and customer satisfaction.
Warranty Information
All used equipment sold by American Instrument Exchange is refurbished/reconditioned, tested to meet specifications, cleaned, and comes with a 90-day warranty from the date of shipment unless otherwise specified. New products include a warranty from the manufacturer. Your warranty is only valid if you have paid your invoice. If your invoice is over 30 days old, warranty work will not be performed until your invoice is paid in full. American Instrument Exchange is not liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products,
Exceptions include international sales and items that are agreed to be sold with a lesser warranty or items that are agreed to be sold “as is.”
Should there be visible shipping damage to packaging or concealed shipping damage to item(s) supplied, buyer must communicate such damage to the delivering entity or carrier upon receipt first and to American Instrument the same day item is accepted / signed for. Failure to do so voids warranty. Customer decision to involve / procure third party or OEM service other than American Instrument or AIE assigned vendors to resolve in-warranty instrument failure or defect without first placing a service call to American Instrument voids warranty.
Return & Cancellation Policy
American Instrument Exchange will authorize the return of and issue a full refund for any equipment that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by AIE or a representative of AIE during the warranty period. Returns without prior authorization and an RMA number will not be accepted.
Customers are responsible for proper packaging of the equipment and all included accessories. American Instrument will pay for insurance and shipping costs. Non-inventory items bought specifically to fill customer orders may possibly be returned, but on a case by case basis.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues may be subject to a Restocking/Cancellation Fee of 20% or more and responsible for shipping costs for both the delivery and return.
Ongoing and Extended Support Options
American Instrument Exchange is able to provide additional repair and support services outside the warranty terms for most products that sell.
For biosafety cabinets, clean benches, chemical fume hoods, and other clean air products our team at AIE Laboratory Services can provide certifications, repairs, decontaminations, and other services for customers throughout New England, and guidance and limited technical assistance for any customers in the US and Canada for new or refurbished biosafety cabinets purchased from American Instrument Exchange.
For all other products, the repair service team at American Instrument Exchange can provide both field and depot repair evaluations. We can easily schedule and coordinate the pick-up and transportation of your malfunctioning equipment. By offering hourly rates lower than most OEM service providers and eliminating travel time for technicians, we help reduce repair costs. Furthermore, our lab depot repair service minimizes or eliminates scheduling delays. Our experienced service technicians are qualified to restore your equipment to factory specifications.
Yes, all equipment from American Instrument Exchange comes with a warranty. Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer's specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
How do you test and recondition the equipment?
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality. We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly.
How do products ship from American Instrument Exchange?
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements.
Return and order cancellation policy
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer's satisfaction during the warranty period. Customers who cancel orders after refurbishing has begun will be subject to a cancellation and restocking fee of between 20% and 40%.
Are discounts available for educational or non-profit institutions, or for bulk purchases?
Yes – call or email us today with a list of equipment you're looking for and we can potentially put together a quote that includes a discount.
How does your price matching policy work?
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we'll do our best to match or beat the price.
Can I see the equipment in person before committing to a purchase?
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Can I ship products that I purchased elsewhere to American Instrument for repair?
Yes – please see our repair services page for more information.
