2602C FURNACE Fisher 650-58

Sorry, this unit has just been sold. Please contact us for alternatives.

Item: 2602C_FURNACE

  • Fully tested
  • Thoroughly cleaned
  • Ships from Haverhill, MA

Contact Us

Call 978-521-2221
to request information & pricing for item 2602C_FURNACE

90-Day Warranty

American Instrument Exchange
Contact us for all your used lab equipment needs

1023 Western Ave.
Haverhill, MA 01832

Phone: 978-521-2221
Fax: 978-521-8822

Email: info@americaninstrument.com

Shipping Policy

Fisher 650-58 laboratory furnace

  • Digital display and microprocessor controlled
  • Up to 24 steps in program mode
  • Internal heat chamber dimensions 12 inches x 14 inches x 6 inches
  • Operating range of 50°C to 1125°C
  • 90 day warranty

The Fisher model 650-58 furnace provides microprocessor controlled heat at temperatures between 50°C and 1125°C (90° to 2057°F).    Capable of up to 24 steps in program mode, a soak period of up to 23 hours 59 minutes and 59 seconds can be inserted between any two successive ramps.  The digital display provides temperature and control readouts and LED indicators identify when heat is being applied or a fault is encountered.

The furnace chamber is molded from alumina silicate ceramic fibers for low thermal mass resulting in fast heat-up and cool down times.  The unusually low external case temperatures enhance safety when working around the unit and the ventilated base prevents damage to the bench or countertop. The electric resistance heating elements ensure extended service life even in atmospheres surrounding high sulfur coal and coke samples.

Click Here    to see the Fisher lab furnace on the American Instrument Exchange YouTube channel.

The model 650-58 has an average temperature uniformity is +/- 5°C and average temperature stability of +/- 1°C.  Power requirements are 208/240VAC at 50/60Hz and 3000 Watts.  The chamber volume is 0.58 square feet and chamber dimensions are 12 inches by 14 inches by 6 inches.

All of our equipment is used and reconditioned. We test ovens using a calibrated digital chart recorder to verify the accuracy of temperature controls and readouts. We replace any hardware or parts as is necessary and clean all incubators thoroughly prior to shipment.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.