Labconco FlaskScrubber Glassware Washer

Sorry, this unit has just been sold. Please contact us for alternatives.

Item: 2707H GL WASH

  • Fully tested
  • Thoroughly cleaned
  • Ships from Haverhill, MA

Contact Us

Call 978-521-2221
to request information & pricing for item 2707H GL WASH

90-Day Warranty

American Instrument Exchange
Contact us for all your used lab equipment needs

1023 Western Ave.
Haverhill, MA 01832

Phone: 978-521-2221
Fax: 978-521-8822


Shipping Policy

Labconco Freestanding FlaskScrubber Glassware Washer

  • Cat.No.: 412001000
  • 93°C washing temperature
  • 9 factory-set programs
  • 90-day warranty

FlaskScrubber Glassware Washers are designed to wash and dry a wide variety of narrow-neck and general purpose labware. Utilizing a brilliant 5” touchscreen display featuring CleanWorks OS, users have full control of wash parameters and washer settings. The included lower spindle rack consists of 36 spindles, and 18 glassware holders for narrow-neck glassware such as volumetric and Erlenmeyer flasks. Able to reach a maximum wash temperature of 93° C (199° F), water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Specialized inserts for pipettes, graduated cylinders, small vials, culture tubes and small utensils makes the FlaskScrubber an extremely versatile glassware washer.

Forced air drying through the spindles and chamber ensures thorough drying inside and out. FlaskScrubber Glassware Washers can be configured to include robust single- or three-phase heating.

The Labconco 41200100 features a lower spindle rack, of 304 stainless steel, with 36 detachable large spindles, 18 glassware holders, 36 adjustable height clips, 10 small spindles with clips, 36 spindle plugs and 12 spindle arm plugs; 304 stainless steel top, door, tank, upper and lower wash arms, and exterior sides and top; one-piece, tool-free, stainless steel, fine mesh particle drain filter; water temperature up to 93° C (199° F); steam generator that produces hot vapor to help remove stubborn labware contaminants; a pump rated at 96 gal/min (363 L/min) when operated at 115V, 60 Hz and 208/230V, 50 Hz and 112 gal/min; synchronous drain pump rated at up to 4.2 gal/min (16 L/min); purified water pump to bring non-pressurized purified water into the tank for up to eight pure water rinses; forced air drying into the tank and through spindles programmable up to 240 minutes and from 25-80° C (77-176° F); electronic door latch with SpeedVent Technology to facilitate faster drying; detergent dispenser for powder or liquid detergent; level-sensing 6 ml rinse aid solution dispenser; and operation at or below 62 decibels.

Our technicians test all equipment to confirm that it operates properly and to the manufacturer’s specifications. While we can’t test for a specific analytical application, we will do our best to simulate the conditions under which the equipment will be run. If you have particular testing requirements or requests, please let us know and we’ll work with you to make sure these requirements are addressed during testing.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.

Labconco Freestanding FlaskScrubber Glassware Washer - Specifications

External dimensions 24.3”W x 27.8”D x 32.2-36.2”H
Pump Capacity 96 gal/min
Electrical requirements 115V, 60Hz
Weight 230 lbs

For inquiries about the Labconco 412001000, please give us a call at 978-521-2221, or fill out the form on this page.