Labconco Flask Scrubber 4420421

Labconco FlaskScrubber Freestanding Glassware Washer

• Cat.No.: 4420421
• 93°C washing temperature
• Dual pump system
• 90-day warranty 

FlaskScrubber glassware washers accommodate and clean a wide variety of glassware, including volumetric flasks, with its specially designed lower spindle rack. LCD provides easy monitoring of wash cycle, including water temperature. Factory preset cycles and two user programmable cycles allow you to customize your wash settings, including up to six pure water rinses. Cycle start delay allows you to set unit to run up to 8 hours later to reduce unwanted noise and lower energy consumption during peak hours. Built-in alarms warn of hot glass, water low, water high, and overflow.

Washer features two pumps, one for washing and one for draining, to reduce possibility of cross-contamination. Increased water temperature allows for glassware sanitization and better cleaning. Steam generator penetrates and removes dried residue, and the built-in purified water pump allows you to use a non-pressurized purified water supply.

FlaskScrubber Glassware Washers have a bottom spindle rack that holds up to 34 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. A patented drying system vacuums moisture from inside the glassware, replacing it with hot, dry air. This is a 230V models heat up to 93°C / 180°F. 

The 4420421 FlaskScrubber features microprocessor cycle programming with touchpad controls; 7 cycle programs; up to 6 rinses; LCD; patented vacuum drying system; dual heaters; detergent and neutralizer dispensers; particle filter; steam generator; purified water pump; stainless steel front and side panels; epoxy-coated steel back panel; one 3/8" IPS inlet fitting for tap water, one fitting for 3/4" ID hose for purified water, and one Multi-Pin Insert.

Our technicians test all equipment to confirm that it operates properly and to the manufacturer’s specifications. While we can’t test for a specific analytical application, we will do our best to simulate the conditions under which the equipment will be run. If you have particular testing requirements or requests, please let us know and we’ll work with you to make sure these requirements are addressed during testing.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned. 

Labconco FlaskScrubber Freestanding Glassware Washer - Specifications

For inquiries about the Labconco 4420421, please give us a call at 978-521-2221, or fill out the form on this page.