Millipore Milli-Q Integral 5

Item: 5659I WATER

  • Fully tested
  • Thoroughly cleaned
  • Ships from Haverhill, MA

Contact Us

Call 978-521-2221
to request information & pricing for item 5659I WATER

90-Day Warranty

American Instrument Exchange
Contact us for all your used lab equipment needs

1023 Western Ave.
Haverhill, MA 01832

Phone: 978-521-2221
Fax: 978-521-8822


Shipping Policy

Millipore Milli-Q Integral 5 Water Purification System

  • Catalog number: 50136151
  • Produces up to 100 L/day
  • Type 1 or 2 water types
  • Filters not included
  • 90-day warranty  

This Millipore Milli-Q water purification system provides pure and ultra-pure water directly from tap water. The Integral 5 can provide up to 100 L per day of type I lab water and up to 150 L per day of type II lab water.

The Milli-Q Integral system includes a comprehensive and optimized sequence of water purification and monitoring technologies in a single unit, allowing both pure and ultra-pure water to be produced from tap. It provides pressurized, bacteria-free water through E-POD units and Milli-Q ultra-pure water through Q-POD units. Water can be delivered from the system's exclusive production unit to as many as 3 independent PODs that can be conveniently located at different places in the lab. Each POD incorporates a color backlit screen enabling the user to check the operation of the entire system and water quality at a glance.

Our technicians test all equipment to confirm that it operates properly and to the manufacturer’s specifications. While we can’t test for a specific analytical application, we will do our best to simulate the conditions under which the equipment will be run. If you have particular testing requirements or requests, please let us know and we’ll work with you to make sure these requirements are addressed during testing.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.


Millipore Milli-Q Integral 5 Water Purification System – Specifications

Product Information

  • Feed Water Nature: Potable Tap Water
  • Flow Rate: 5 Liters per hour
  • Product Water Volume: 100L/day
  • Product Water Conductivity: 0.056 uS/cm
  • Product Water Resistivity:
    • Ultrapure Water: 18.2 MegOhm-cm
    • Pure Water: >5 MegOhm-cm
  • Product Water TOC: < 5 ppb
  • Voltage: 100-240 V/50-60 Hz

 Biological Information

  • Product Water DNase: < 5 pg/mL (with Biopak Polisher)
  • Product Water Microorganisms: < 0.1 CFU/mL (with Millipak of Biopak point of use filters)
  • Product Water Pyrogens: < 0.001 EU/mL (with Biopak Polisher)
  • Product Water RNase: < 1 pg/mL (with Biopak Polisher)

Physicochemical Information

  • Make-up Flow Rate: 5 L/h
  • Flow Rate: 5 L/h
  • Product Water Resistivity at 25°C:
    • Pure Water: >5 MegOhm-cm
    • Ultrapure Water: 18.2 MegOhm-cm
  • Product Water TOC: < 5 ppb
  • Voltage: 100-240 V/50-60 Hz


  • Depth: 48.4 cm (19 ")
  • Height: 50 cm (19.7")
  • Width: 33.2 cm (13.07")
  • Operating Weight: 24-28 kg (52.9-61.7 lb)

For inquiries about the Millipore Milli-Q Integral 5 Water Purification System, please give us a call at 978-521-2221, or fill out the form on this page.