6' Mott fume hood

Mott 6’ Pro Series Bench Fume Hood

• Model: 7421040
• Vertical sash
• Epoxy resin countertop
• 90-day warranty

This Pro Series fume hood is designed to meet most laboratory Constant Air Volume (CAV) or Variable Air Volume (VAV) requirements and supplied with an automatic compensating upper by-pass. Designed to mount on a 30” deep countertop. The fume hood is supplied with the following standard features:

Counterbalance systems - Chain and sprocket system delivers the easiest and most reliable sash operation available with an exceptionally long life span. High-quality stainless-steel cable system provides economical and reliable operation; tested to 100,000 cycles with no failure.

Stainless steel airfoil - Aerodynamic raised design allows air to enter the fume hood even when the sash is closed ensuring efficient fume exhaust. Notches in both corners allow electrical wiring or tubing into the fume hood while still permitting full closure of the sash.

Sash design - 6mm laminated safety glass is provided with a stainless-steel handle and side runners. Hood has a vertical sash. 30” viewing height. The vertical sash travels up and down only, and generally provides maximum protection for the operator’s face when it is used approximately half open.

Stainless-steel type 316 exhaust collar – 12” round collar with radiused corners allows for direct connection to exhaust duct to reduce duct transition costs, minimize static pressure losses and exhaust noise levels.

Electrical - Two UL/CSA approved duplex receptacles provided for 120 volt service, one on each corner post. UL/CSA approved fluorescent light fixture and switch provided.

Plumbing - Both corner posts are pre-punched to accept a maximum of five plumbing fittings per post.

Access panels - Interior gasketed access panels provide convenient access and prevent fume leakage outside the hood chamber. Exterior side panels are also removable for ease of access to plumbing and electrical service fixtures.

Epoxy resin countertop - A solid, cast epoxy countertop provides resistance to a very broad range of chemicals.

Fiberglass reinforced polyester (FRP) liner – An excellent general purpose liner that offers good resistance to most solvents, bases, and acids; low flame spreading rate; and strong structural strength.

Most of our equipment is used and reconditioned. Our technicians inspect all fume hoods to make sure that the baffles are present and intact, the interior lights are functioning, and that the sash is intact and runs smoothly on the tracks along with the counterweights. We can also provide information on the fixtures installed on each hood. Please note that we do not provide blower motors with fume hood sales. For more information on blower motor selection please feel free to call or email us; we recommend speaking with an HVAC specialist regarding your particular motor needs.

The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.

Mott 6’ Pro Series Bench Fume Hood – Specifications

For inquiries about the Mott 6’ Pro Series Bench Fume Hood, please give us a call at 978-521-2221, or fill out the form on this page.