All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
American Biotech Supply CRT-ABT-HC-UCFS-0204 Controlled Room Temperature Cabinet
Many laboratory products, pharmaceuticals, diagnostic reagents, and medical supplies require storage at controlled room temperature rather than in a refrigerator or incubator. The American Biotech Supply CRT-ABT-HC-UCFS-0204 Controlled Room Temperature Cabinet provides a stable storage environment between 20°C and 25°C (68°F to 77°F), helping laboratories, pharmacies, and healthcare facilities maintain compliance with manufacturer storage recommendations while protecting valuable inventory from damaging temperature fluctuations.
Designed for laboratory and healthcare environments, the CRT-ABT-HC-UCFS-0204 combines a 2.5 cubic foot storage capacity with a microprocessor temperature controller, forced-air circulation system, digital temperature display, and audible/visual alarms. Its compact undercounter footprint makes it an excellent choice where laboratory space is limited while still providing dependable temperature uniformity and rapid recovery following door openings. Purchasing a refurbished American Biotech Supply controlled room temperature cabinet from American Instrument Exchange allows laboratories to obtain dependable temperature-controlled storage equipment at substantial savings compared with purchasing new equipment.
American Biotech Supply CRT-ABT-HC-UCFS-0204 Key Features
2.5 cu. ft. controlled room temperature storage
Adjustable operating temperature range of 20°C to 25°C (68°F to 77°F)
Microprocessor temperature controller
Digital temperature display
Forced-draft air circulation
Audible and visual high/low temperature alarms
Remote alarm contacts
Two independent temperature probes (air and sample bottle)
Four adjustable shelves (two full-width, two half-width)
Keyed door lock
LED interior lighting
Probe access port
Environmentally friendly R600a refrigerant
ADA-compliant undercounter design
90-day warranty from American Instrument Exchange
Designed for Controlled Room Temperature Storage
Unlike general-purpose cabinets that simply protect products from dust or physical damage, the CRT-ABT-HC-UCFS-0204 actively maintains a tightly controlled storage environment using electronic temperature regulation and forced-air circulation. The microprocessor continuously monitors cabinet temperature and adjusts operation to maintain the programmed storage range, while dual temperature probes verify both air temperature and simulated product temperature.
This design helps laboratories maintain compliance with controlled room temperature storage requirements for pharmaceuticals, diagnostic reagents, laboratory chemicals, and other products whose manufacturers specify storage between 20°C and 25°C. Audible and visual alarms immediately notify personnel if temperatures move outside the programmed range, helping protect valuable inventory and reduce the risk of product loss.
The American Biotech Supply CRT-ABT-HC-UCFS-0204 is well suited for hospitals, pharmacies, biotechnology companies, pharmaceutical manufacturers, research laboratories, diagnostic testing facilities, and clinical laboratories requiring controlled room temperature storage in a compact footprint.
Its ADA-compliant undercounter design makes it particularly valuable in facilities where floor space is limited while still requiring regulated storage conditions for sensitive products.
Precise Temperature Control and Laboratory Security
The CRT-ABT-HC-UCFS-0204 combines forced-air circulation with microprocessor temperature control to provide excellent temperature uniformity throughout the cabinet. Dual temperature probes continuously monitor cabinet conditions, while audible and visual alarms alert personnel if temperatures move outside the programmed operating range. Remote alarm contacts allow integration with facility monitoring systems, and the keyed door lock helps protect valuable pharmaceuticals and laboratory materials from unauthorized access.
The forced-air circulation system promotes rapid temperature recovery following routine door openings, helping maintain product integrity throughout the workday.
Storage Recommendations
The 2.5 cubic foot storage capacity of the American Biotech Supply CRT-ABT-HC-UCFS-0204 is ideal for laboratories and healthcare facilities requiring secure, temperature-controlled storage for smaller inventories of pharmaceuticals, diagnostic reagents, laboratory chemicals, and other materials that must be maintained at controlled room temperature (20°C to 25°C / 68°F to 77°F).
The cabinet includes four adjustable shelves (two full-width and two half-width), allowing users to configure the interior for a variety of bottle sizes, reagent kits, medication containers, and laboratory supplies. The forced-air circulation system helps maintain consistent temperatures throughout the cabinet, while proper spacing between stored items promotes uniform airflow and rapid temperature recovery after routine door openings.
This compact cabinet is particularly well suited for point-of-use storage in laboratories, pharmacies, and clinical settings where frequently accessed materials require dependable controlled room temperature conditions.
Energy Efficiency and Operating Costs
The CRT-ABT-HC-UCFS-0204 was designed to provide dependable temperature-controlled storage while minimizing long-term operating costs. Its high-efficiency refrigeration system utilizes environmentally friendly R600a refrigerant, reducing energy consumption while maintaining stable cabinet temperatures.
A microprocessor controller continuously monitors cabinet conditions and automatically adjusts operation to maintain the programmed temperature range. The forced-air circulation system promotes rapid temperature recovery following door openings, helping reduce compressor run time and improve overall operating efficiency.
Routine maintenance is straightforward, and the durable cabinet construction is designed for years of reliable service in demanding laboratory and healthcare environments.
American Biotech Supply CRT-ABT-HC-UCFS-0204 Controlled Room Temperature Cabinet Key Specifications
Specification
Details
Manufacturer
American Biotech Supply
Model
CRT-ABT-HC-UCFS-0204
Equipment Type
Controlled Room Temperature Cabinet
Storage Capacity
2.5 cu. ft.
Temperature Range
20°C to 25°C (68°F to 77°F), adjustable
Temperature Control
Digital Microprocessor Controller
Air Circulation
Forced Air
Display
Digital Temperature Display
Temperature Monitoring
Dual probes (air and simulated product)
Alarm System
Audible and visual high/low temperature alarms
Remote Alarm Contacts
Yes
Door Lock
Keyed
Interior Lighting
LED
Shelves
4 adjustable (2 full-width, 2 half-width)
Refrigerant
R600a
Access Port
Yes
Electrical Requirements
115 V, 60 Hz
Exterior Dimensions
24.0" W × 24.75" D × 35.75" H
Specifications are believed to be accurate but may vary depending on production date or factory-installed options. Please verify all specifications prior to purchase.
American Biotech Supply CRT-ABT-HC-UCFS-0204 Frequently Asked Questions
What is a controlled room temperature cabinet?
A controlled room temperature cabinet actively maintains products within a specified temperature range—typically 20°C to 25°C (68°F to 77°F)—using electronic temperature regulation. This provides significantly greater protection than storing products in an uncontrolled room where seasonal or daily temperature fluctuations may occur.
What products are commonly stored in this cabinet?
The CRT-ABT-HC-UCFS-0204 is commonly used for pharmaceuticals, diagnostic reagents, laboratory chemicals, quality control materials, medical devices, test kits, and other products whose manufacturers specify controlled room temperature storage.
How does the cabinet monitor temperature?
The cabinet utilizes a digital microprocessor controller together with dual temperature probes that monitor both cabinet air temperature and a simulated product temperature, providing a more representative indication of actual storage conditions.
Does the cabinet include an alarm system?
Yes. Audible and visual alarms alert users to high or low temperature conditions, and remote alarm contacts allow connection to facility monitoring systems for additional protection.
Is this cabinet suitable for refrigerated or frozen storage?
No. The CRT-ABT-HC-UCFS-0204 is specifically designed to maintain controlled room temperature. Products requiring refrigerated, freezer, or ultra-low temperature storage should be stored in equipment designed for those temperature ranges.
Is the cabinet secure?
Yes. The cabinet includes a keyed door lock to help restrict access to stored pharmaceuticals, laboratory reagents, and other valuable materials.
What facilities commonly use the CRT-ABT-HC-UCFS-0204?
This cabinet is frequently used in hospitals, pharmacies, biotechnology companies, pharmaceutical manufacturers, clinical laboratories, research facilities, diagnostic laboratories, and healthcare organizations requiring dependable controlled room temperature storage.
Why purchase a refurbished American Biotech Supply CRT-ABT-HC-UCFS-0204 from American Instrument Exchange?
Purchasing a refurbished American Biotech Supply CRT-ABT-HC-UCFS-0204 from American Instrument Exchange provides laboratories and healthcare facilities with dependable controlled room temperature storage at substantial savings compared with purchasing new equipment. Combining precise microprocessor temperature control, forced-air circulation, audible and visual alarms, and a compact ADA-compliant design, this cabinet is an excellent solution for protecting pharmaceuticals, laboratory reagents, and other temperature-sensitive materials. Every unit is inspected and tested prior to shipment and includes a 90-day warranty for added confidence.
CLICK HEREto see the American Biotech CRT-ABT-HC-UCFS-0204 on our YouTube channel
Testing
Most of our equipment is used and reconditioned. Our technicians test refrigerators using a calibrated digital chart recorder to verify the accuracy of temperature controls and readouts. We replace any hardware or parts as is necessary and clean all refrigerators thoroughly prior to shipment.
Pictures
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment.
We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after testing and cleaning.
American BioTech Supply Undercounter Controlled Room Temperature Cabinet – specifications
External Dimensions
17.75”W x 19.5”D x 28.87”H
Interior Dimensions
14.5”W x 13.25”D x 23.25”H
Temperature Range
20° to 25°C
Capacity
2.5 cu ft
Electrical requirements
115V, 60 Hz
For inquiries about the American Biotech CRT-ABT-HC-UCFS-0204 Supply Undercounter Controlled Room Temperature Cabinet, please give us a call at 978-521-2221, or fill out the form on this page.
Testing Procedures for Used and Refurbished Laboratory Incubators Ensure Quality and Stability Before Use
Used and refurbished laboratory incubators from American Instrument Exchange are thoroughly tested to ensure optimal performance and temperature stability with laboratory safety standards. Each unit undergoes a detailed inspection and functionality assessment to meet the needs of research, clinical, and industrial labs.
Why Testing Used Laboratory Incubators Is Essential
Before a laboratory incubator is reintroduced into any work environment, it must be tested for:
• Temperature uniformity and accuracy
• Airflow and humidity control (if applicable)
• Door seal integrity and insulation effectiveness
• Electrical and safety system compliance
Comprehensive testing reduces the risk of culture loss, contamination, and equipment failure—especially critical in applications involving cell culture, microbiology, pharmaceutical research, and diagnostics.
Our multi-point testing protocol for used and refurbished incubators ensures reliability, safety, and performance across all models and brands.
Key Testing Procedures for Refurbished and Used Laboratory Incubators
1. Initial Visual Inspection
• Check for cosmetic damage, corrosion, and wear to exterior surfaces, door hinges, and gasket seals
• Inspect power cord, wiring, and display panel for any defects or signs of tampering
• Confirm that shelves, chamber components, and internal fixtures are present and undamaged
2. Functional Testing
• Power on the incubator and verify all display indicators and alarms function correctly
• Test door latch and seal mechanisms for proper closure and insulation
• Run basic temperature cycles to ensure the unit maintains stability over time
3. Temperature Accuracy and Uniformity Tests
• Test internal sensors and controllers using temperature probes
• Measure temperature consistency at multiple chamber locations over several hours
• Confirm that programmable temperature settings respond accurately
4. Airflow and Humidity Control (if applicable)
• Test internal fan operation and airflow distribution
• For humidified incubators, inspect and test humidity reservoirs, sensors, and control systems
• Check for condensation buildup and confirm environmental stability
5. Electrical Safety and Compliance Checks
• Ensure all electrical components are properly grounded
• Perform insulation resistance and leakage current tests
• Verify compliance with current electrical safety standards for laboratory equipment
6. Final Quality Assurance Checklist
• Perform full cycle testing at various temperature setpoints
• Document performance benchmarks and results
All refurbished incubators from American Instrument Exchange are backed by our commitment to quality and precision. With our strict testing procedures, you can rely on your incubator to deliver dependable results from day one.
Repair and Refurbishment Protocol for Used Laboratory Incubators Performance and Quality from American Instrument Exchange
At American Instrument Exchange, every used laboratory incubator we sell goes through a repair and refurbishment protocol. Whether it’s a standard, CO₂, or refrigerated incubator, our goal is to restore each unit to laboratory-level performance—ensuring temperature accuracy, environmental stability, and long-term reliability in your lab.
Why Choose a Refurbished Laboratory Incubator from American Instrument Exchange?
• Fully tested for performance and safety
• Backed by a warranty
• Cost-effective alternative to new equipment
• Environmentally sustainable through reuse and restoration
• Refurbished by expert technicians with decades of lab equipment experience
Step-by-Step Refurbishment Protocol
Every incubator at American Instrument Exchange follows this comprehensive, multi-stage process:
1. Initial Intake & Inspection
• Visual inspection for cosmetic wear, corrosion, dents, or broken components
• Mechanical assessment of door hinges, gaskets, seals, and chamber components
• Document any missing parts or issues requiring repair or replacement
2. Cleaning and Decontamination
• Thorough internal and external cleaning using non-abrasive solutions
• Decontamination/cleaning of surfaces to remove biological, chemical, or particulate residue
• Cleaning of removable parts (e.g., shelves, trays, etc.)
3. Mechanical and Electrical Repair
• Repair or replacement of worn mechanical components such as door latches, fans, hinges, and seals
• Evaluation and repair of control panels, switches, thermostats, and displays
• Inspection and testing of wiring, fuses, relays, and power supplies
4. Environmental Control System Assessment
• For CO₂ incubators: CO₂ sensors, regulators, and gas delivery systems are tested
• For refrigerated incubators: compressors, condensers, and cooling systems are evaluated for performance and leaks
• Fan motors and airflow systems are tested to ensure uniform environmental conditions
5. Temperature and Sensor Testing
• All temperature sensors and controllers are tested using thermometers/probes
• Uniformity and accuracy tested at multiple chamber locations
• For humidified or CO₂ incubators, humidity and CO₂ stability are verified
6. Safety System Testing
• Test of over-temperature protection systems and alarms
• Evaluation of door sensors, safety interlocks, and power failure recovery
7. Final Quality Control and Documentation
• Full performance test run over 24 hours
• Validation of setpoints for temperature, CO₂ (if applicable), and humidity (if applicable)
• Final inspection and cleaning before packaging
• Complete service report
Trust the Experts at American Instrument Exchange
With over 50 years in the lab equipment industry, American Instrument Exchange is a trusted source for high-quality refurbished laboratory incubators. Our proven refurbishment protocol ensures every unit is reliable, accurate, and ready to meet the demands of your lab from day one.
Warranty Information
All used equipment sold by American Instrument Exchange is refurbished/reconditioned, tested to meet specifications, cleaned, and comes with a 90-day warranty from the date of shipment unless otherwise specified. New products include a warranty from the manufacturer. Your warranty is only valid if you have paid your invoice. If your invoice is over 30 days old, warranty work will not be performed until your invoice is paid in full. American Instrument Exchange is not liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products,
Exceptions include international sales and items that are agreed to be sold with a lesser warranty or items that are agreed to be sold “as is.”
Should there be visible shipping damage to packaging or concealed shipping damage to item(s) supplied, buyer must communicate such damage to the delivering entity or carrier upon receipt first and to American Instrument the same day item is accepted / signed for. Failure to do so voids warranty. Customer decision to involve / procure third party or OEM service other than American Instrument or AIE assigned vendors to resolve in-warranty instrument failure or defect without first placing a service call to American Instrument voids warranty.
Return & Cancellation Policy
American Instrument Exchange will authorize the return of and issue a full refund for any equipment that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by AIE or a representative of AIE during the warranty period. Returns without prior authorization and an RMA number will not be accepted.
Customers are responsible for proper packaging of the equipment and all included accessories. American Instrument will pay for insurance and shipping costs. Non-inventory items bought specifically to fill customer orders may possibly be returned, but on a case by case basis.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues may be subject to a Restocking/Cancellation Fee of 20% or more and responsible for shipping costs for both the delivery and return.
Ongoing and Extended Support Options
American Instrument Exchange is able to provide additional repair and support services outside the warranty terms for most products that sell.
For biosafety cabinets, clean benches, chemical fume hoods, and other clean air products our team at AIE Laboratory Services can provide certifications, repairs, decontaminations, and other services for customers throughout New England, and guidance and limited technical assistance for any customers in the US and Canada for new or refurbished biosafety cabinets purchased from American Instrument Exchange.
For all other products, the repair service team at American Instrument Exchange can provide both field and depot repair evaluations. We can easily schedule and coordinate the pick-up and transportation of your malfunctioning equipment. By offering hourly rates lower than most OEM service providers and eliminating travel time for technicians, we help reduce repair costs. Furthermore, our lab depot repair service minimizes or eliminates scheduling delays. Our experienced service technicians are qualified to restore your equipment to factory specifications.
Yes, all equipment from American Instrument Exchange comes with a warranty. Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer's specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
How do you test and recondition the equipment?
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality. We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly.
How do products ship from American Instrument Exchange?
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements.
Return and order cancellation policy
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer's satisfaction during the warranty period. Customers who cancel orders after refurbishing has begun will be subject to a cancellation and restocking fee of between 20% and 40%.
Are discounts available for educational or non-profit institutions, or for bulk purchases?
Yes – call or email us today with a list of equipment you're looking for and we can potentially put together a quote that includes a discount.
How does your price matching policy work?
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we'll do our best to match or beat the price.
Can I see the equipment in person before committing to a purchase?
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Can I ship products that I purchased elsewhere to American Instrument for repair?
Yes – please see our repair services page for more information.
