All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
Binder KB400UL Refrigerated Incubator
Many microbiology, pharmaceutical, environmental, and quality assurance laboratories require precise temperature control across a wide operating range while maintaining exceptional temperature uniformity and repeatability. Applications such as microbiological culturing, pharmaceutical stability testing, water quality analysis, food safety testing, and method validation depend on dependable environmental control to produce accurate and reproducible results. The Binder KB400UL Refrigerated Incubator is designed to meet these demands with a 14.1 cubic foot (400 L) chamber, a temperature range of -10°C to 100°C, compressor-based refrigeration, programmable microprocessor controls, and Binder's APT.line™ preheating chamber technology, which promotes outstanding temperature uniformity throughout the chamber.
Although this KB400UL represents an earlier-generation Binder refrigerated incubator, it remains highly regarded for its robust construction, dependable environmental performance, and advanced programming capabilities. Features including a tempered safety glass inner door, adjustable fan speed, Ethernet communication, programmable time-segment control, heated door, and Class 3.1 overtemperature protection make it an excellent solution for laboratories requiring repeatable temperature-controlled testing over extended periods. Purchasing a refurbished Binder KB400UL from American Instrument Exchange provides laboratories with a proven research- and quality-control-grade refrigerated incubator at a substantial savings compared to purchasing a new system.
Binder KB400UL Key Features
14.1 cu. ft. (400 L) chamber capacity
Temperature range: -10°C to 100°C
Binder APT.line™ preheating chamber technology
Compressor-based refrigeration system
Microprocessor controller with time-segment and real-time programming
Adjustable fan speed
Tempered safety glass inner door
Heated outer door
Ethernet communication interface
30 mm access port with silicone plug
Class 3.1 independent overtemperature safety protection
Two stainless steel shelves (expandable to fifteen)
Four heavy-duty casters, two with locking brakes
120V electrical operation
90-day warranty from American Instrument Exchange
Designed for Precision Temperature-Controlled Testing
The Binder KB400UL is engineered for laboratories requiring exceptional temperature stability across an unusually broad operating range. Its compressor-based refrigeration system allows refrigerated incubation below ambient temperatures while integrated heating enables operation up to 100°C, allowing a single chamber to support numerous microbiological, pharmaceutical, environmental, and industrial testing applications. Binder's proprietary APT.line™ preheating chamber technology promotes highly uniform temperature distribution, helping ensure that every sample experiences consistent incubation conditions regardless of shelf position.
The programmable controller allows users to create both real-time and multi-segment temperature profiles for complex testing protocols, making the KB400UL particularly valuable for laboratories performing validation studies, environmental simulation, stability testing, and regulated quality assurance procedures. Adjustable fan speed provides additional flexibility by allowing airflow to be optimized for different sample types, while the heated outer door helps minimize condensation during refrigerated operation. These features combine to deliver dependable environmental control for laboratories requiring highly reproducible results.
Common Applications
The Binder KB400UL is commonly used for:
Microbiological culturing
Pharmaceutical stability testing
Water quality analysis
Food and beverage quality testing
Environmental microbiology
Biological oxygen demand (BOD) testing
Method validation
Product shelf-life studies
Pharmaceutical quality control
Clinical laboratory research
Industrial quality assurance
General laboratory incubation
The KB400UL is frequently integrated into quality control and microbiology laboratories alongside laboratory refrigerators for reagent storage, laboratory freezers for long-term sample preservation, biosafety cabinets for aseptic microbiological procedures, centrifuges for sample preparation, and analytical balances for precision measurements during testing workflows.
Ideal Laboratory Environments
The Binder KB400UL is an excellent choice for pharmaceutical manufacturers, biotechnology companies, environmental testing laboratories, food and beverage quality laboratories, contract testing organizations, government laboratories, university research facilities, clinical laboratories, and industrial quality assurance departments. Its broad operating temperature range, advanced programming capabilities, and highly uniform chamber conditions make it particularly valuable for laboratories performing regulated testing and validation procedures.
Why Choose the Binder KB400UL?
The Binder KB400UL combines exceptional temperature range, advanced programming flexibility, and highly uniform chamber performance in a refrigerated incubator designed for demanding laboratory applications. Its APT.line™ preheating chamber technology, programmable controller, compressor refrigeration, and durable construction provide the environmental stability required for microbiological research, pharmaceutical testing, quality assurance, and industrial laboratory workflows.
Whether supporting routine microbiology, pharmaceutical stability studies, environmental testing, or complex validation protocols, the Binder KB400UL delivers the precision, repeatability, and operational flexibility that have made Binder refrigerated incubators a trusted choice in laboratories around the world.
Performance and Temperature Uniformity
The Binder KB400UL Refrigerated Incubator is engineered to provide exceptional temperature stability across a wide operating range while maintaining highly uniform chamber conditions for demanding laboratory applications. At the heart of its performance is Binder's APT.line preheating chamber technology, which gently conditions incoming air before it enters the incubation chamber. This design helps minimize temperature fluctuations and promotes outstanding temperature uniformity throughout the workspace, ensuring that samples on different shelves experience nearly identical environmental conditions.
The KB400UL combines compressor-based refrigeration with precision heating to maintain temperatures from -10°C to 100°C, allowing laboratories to perform refrigerated incubation, ambient testing, elevated-temperature studies, and accelerated stability testing within a single instrument. Its microprocessor controller supports both fixed-temperature operation and programmable multi-segment temperature profiles, enabling researchers to automate complex testing protocols while maintaining consistent environmental conditions over extended periods.
Adjustable fan speed provides additional flexibility for laboratories working with a variety of sample types. Higher airflow settings promote rapid temperature recovery following door openings, while reduced airflow can be selected for applications requiring gentler environmental conditions. A heated outer door helps reduce condensation during low-temperature operation, while the tempered safety glass inner door allows researchers to observe samples without unnecessarily disturbing chamber conditions. Together, these design features make the KB400UL particularly well suited for laboratories where reproducibility and environmental consistency are critical.
Typical Samples and Laboratory Applications
The Binder KB400UL supports a diverse range of microbiological, pharmaceutical, environmental, and industrial laboratory applications. Typical samples include bacterial cultures, fungal cultures, yeast, environmental water samples, food products, beverage samples, pharmaceutical formulations, biological specimens, clinical samples, culture media, quality control standards, environmental monitoring samples, and industrial products undergoing stability evaluation.
Common laboratory applications include microbiological incubation, pharmaceutical stability studies, biological oxygen demand (BOD) testing, water quality analysis, food and beverage quality assurance, method validation, shelf-life testing, environmental microbiology, pharmaceutical quality control, product development, regulatory compliance testing, and general laboratory incubation. Its broad operating temperature range also makes the chamber valuable for laboratories performing specialized protocols that require both refrigerated and elevated-temperature conditions.
Two Stainless Steel Shelves (Expandable to Fifteen)
Access Port
30 mm with Silicone Plug
Communication
Ethernet Interface
Electrical Requirements
120V, 60 Hz
Specifications are compiled from manufacturer literature and American Instrument Exchange product information. Specifications may vary depending on production year and installed options. Please verify chamber dimensions, electrical requirements, operating temperature range, shelf configuration, and included accessories prior to purchase.
Frequently Asked Questions
What is Binder APT.line technology?
APT.line preheating chamber technology is Binder's airflow design that preconditions circulating air before it enters the chamber. This promotes excellent temperature uniformity throughout the incubator, helping ensure that all samples experience consistent environmental conditions regardless of shelf position.
What applications is the Binder KB400UL best suited for?
The KB400UL is commonly used for microbiological culturing, pharmaceutical stability testing, biological oxygen demand (BOD) testing, water quality analysis, food safety testing, environmental microbiology, method validation, product development, and industrial quality assurance.
Why is a temperature range of -10°C to 100°C beneficial?
The wide operating range allows a single incubator to perform refrigerated incubation, ambient-temperature studies, elevated-temperature incubation, and accelerated stability testing, reducing the need for multiple specialized instruments.
Can temperature programs be automated?
Yes. The microprocessor controller supports both fixed-temperature operation and programmable multi-segment temperature profiles, allowing laboratories to automate complex testing procedures and improve experimental repeatability.
What advantage does the heated outer door provide?
The heated outer door helps reduce condensation during refrigerated operation, improving visibility through the glass door and minimizing moisture accumulation while maintaining stable chamber conditions.
Which laboratories commonly use the Binder KB400UL?
The KB400UL is widely used in pharmaceutical manufacturers, biotechnology companies, environmental testing laboratories, food and beverage quality laboratories, contract testing facilities, university research laboratories, clinical laboratories, and industrial quality assurance departments.
Why purchase a refurbished Binder KB400UL Refrigerated Incubator from American Instrument Exchange?
A refurbished Binder KB400UL Refrigerated Incubator from American Instrument Exchange provides laboratories with premium German-engineered temperature control at a substantial savings compared to purchasing a new system. Featuring a 14.1 cubic foot chamber, -10°C to 100°C operating range, APT.line preheating chamber technology, programmable microprocessor controls, adjustable airflow, and compressor-based refrigeration, the KB400UL is an outstanding choice for microbiology, pharmaceutical testing, environmental analysis, food safety, and quality assurance laboratories. Every unit is thoroughly inspected and tested prior to shipment and includes a 90-day warranty from American Instrument Exchange.
Click here to see a video of the Binder KB400 on our YouTube channel.
Testing Procedures for Used and Refurbished Laboratory Incubators Ensure Quality and Stability Before Use
Used and refurbished laboratory incubators from American Instrument Exchange are thoroughly tested to ensure optimal performance and temperature stability with laboratory safety standards. Each unit undergoes a detailed inspection and functionality assessment to meet the needs of research, clinical, and industrial labs.
Why Testing Used Laboratory Incubators Is Essential
Before a laboratory incubator is reintroduced into any work environment, it must be tested for:
• Temperature uniformity and accuracy
• Airflow and humidity control (if applicable)
• Door seal integrity and insulation effectiveness
• Electrical and safety system compliance
Comprehensive testing reduces the risk of culture loss, contamination, and equipment failure—especially critical in applications involving cell culture, microbiology, pharmaceutical research, and diagnostics.
Our multi-point testing protocol for used and refurbished incubators ensures reliability, safety, and performance across all models and brands.
Key Testing Procedures for Refurbished and Used Laboratory Incubators
1. Initial Visual Inspection
• Check for cosmetic damage, corrosion, and wear to exterior surfaces, door hinges, and gasket seals
• Inspect power cord, wiring, and display panel for any defects or signs of tampering
• Confirm that shelves, chamber components, and internal fixtures are present and undamaged
2. Functional Testing
• Power on the incubator and verify all display indicators and alarms function correctly
• Test door latch and seal mechanisms for proper closure and insulation
• Run basic temperature cycles to ensure the unit maintains stability over time
3. Temperature Accuracy and Uniformity Tests
• Test internal sensors and controllers using temperature probes
• Measure temperature consistency at multiple chamber locations over several hours
• Confirm that programmable temperature settings respond accurately
4. Airflow and Humidity Control (if applicable)
• Test internal fan operation and airflow distribution
• For humidified incubators, inspect and test humidity reservoirs, sensors, and control systems
• Check for condensation buildup and confirm environmental stability
5. Electrical Safety and Compliance Checks
• Ensure all electrical components are properly grounded
• Perform insulation resistance and leakage current tests
• Verify compliance with current electrical safety standards for laboratory equipment
6. Final Quality Assurance Checklist
• Perform full cycle testing at various temperature setpoints
• Document performance benchmarks and results
All refurbished incubators from American Instrument Exchange are backed by our commitment to quality and precision. With our strict testing procedures, you can rely on your incubator to deliver dependable results from day one.
Repair and Refurbishment Protocol for Used Laboratory Incubators Performance and Quality from American Instrument Exchange
At American Instrument Exchange, every used laboratory incubator we sell goes through a repair and refurbishment protocol. Whether it’s a standard, CO₂, or refrigerated incubator, our goal is to restore each unit to laboratory-level performance—ensuring temperature accuracy, environmental stability, and long-term reliability in your lab.
Why Choose a Refurbished Laboratory Incubator from American Instrument Exchange?
• Fully tested for performance and safety
• Backed by a warranty
• Cost-effective alternative to new equipment
• Environmentally sustainable through reuse and restoration
• Refurbished by expert technicians with decades of lab equipment experience
Step-by-Step Refurbishment Protocol
Every incubator at American Instrument Exchange follows this comprehensive, multi-stage process:
1. Initial Intake & Inspection
• Visual inspection for cosmetic wear, corrosion, dents, or broken components
• Mechanical assessment of door hinges, gaskets, seals, and chamber components
• Document any missing parts or issues requiring repair or replacement
2. Cleaning and Decontamination
• Thorough internal and external cleaning using non-abrasive solutions
• Decontamination/cleaning of surfaces to remove biological, chemical, or particulate residue
• Cleaning of removable parts (e.g., shelves, trays, etc.)
3. Mechanical and Electrical Repair
• Repair or replacement of worn mechanical components such as door latches, fans, hinges, and seals
• Evaluation and repair of control panels, switches, thermostats, and displays
• Inspection and testing of wiring, fuses, relays, and power supplies
4. Environmental Control System Assessment
• For CO₂ incubators: CO₂ sensors, regulators, and gas delivery systems are tested
• For refrigerated incubators: compressors, condensers, and cooling systems are evaluated for performance and leaks
• Fan motors and airflow systems are tested to ensure uniform environmental conditions
5. Temperature and Sensor Testing
• All temperature sensors and controllers are tested using thermometers/probes
• Uniformity and accuracy tested at multiple chamber locations
• For humidified or CO₂ incubators, humidity and CO₂ stability are verified
6. Safety System Testing
• Test of over-temperature protection systems and alarms
• Evaluation of door sensors, safety interlocks, and power failure recovery
7. Final Quality Control and Documentation
• Full performance test run over 24 hours
• Validation of setpoints for temperature, CO₂ (if applicable), and humidity (if applicable)
• Final inspection and cleaning before packaging
• Complete service report
Trust the Experts at American Instrument Exchange
With over 50 years in the lab equipment industry, American Instrument Exchange is a trusted source for high-quality refurbished laboratory incubators. Our proven refurbishment protocol ensures every unit is reliable, accurate, and ready to meet the demands of your lab from day one.
Warranty Information
All used equipment sold by American Instrument Exchange is refurbished/reconditioned, tested to meet specifications, cleaned, and comes with a 90-day warranty from the date of shipment unless otherwise specified. New products include a warranty from the manufacturer. Your warranty is only valid if you have paid your invoice. If your invoice is over 30 days old, warranty work will not be performed until your invoice is paid in full. American Instrument Exchange is not liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products,
Exceptions include international sales and items that are agreed to be sold with a lesser warranty or items that are agreed to be sold “as is.”
Should there be visible shipping damage to packaging or concealed shipping damage to item(s) supplied, buyer must communicate such damage to the delivering entity or carrier upon receipt first and to American Instrument the same day item is accepted / signed for. Failure to do so voids warranty. Customer decision to involve / procure third party or OEM service other than American Instrument or AIE assigned vendors to resolve in-warranty instrument failure or defect without first placing a service call to American Instrument voids warranty.
Return & Cancellation Policy
American Instrument Exchange will authorize the return of and issue a full refund for any equipment that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by AIE or a representative of AIE during the warranty period. Returns without prior authorization and an RMA number will not be accepted.
Customers are responsible for proper packaging of the equipment and all included accessories. American Instrument will pay for insurance and shipping costs. Non-inventory items bought specifically to fill customer orders may possibly be returned, but on a case by case basis.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues may be subject to a Restocking/Cancellation Fee of 20% or more and responsible for shipping costs for both the delivery and return.
Ongoing and Extended Support Options
American Instrument Exchange is able to provide additional repair and support services outside the warranty terms for most products that sell.
For biosafety cabinets, clean benches, chemical fume hoods, and other clean air products our team at AIE Laboratory Services can provide certifications, repairs, decontaminations, and other services for customers throughout New England, and guidance and limited technical assistance for any customers in the US and Canada for new or refurbished biosafety cabinets purchased from American Instrument Exchange.
For all other products, the repair service team at American Instrument Exchange can provide both field and depot repair evaluations. We can easily schedule and coordinate the pick-up and transportation of your malfunctioning equipment. By offering hourly rates lower than most OEM service providers and eliminating travel time for technicians, we help reduce repair costs. Furthermore, our lab depot repair service minimizes or eliminates scheduling delays. Our experienced service technicians are qualified to restore your equipment to factory specifications.
Yes, all equipment from American Instrument Exchange comes with a warranty. Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer's specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
How do you test and recondition the equipment?
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality. We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly.
How do products ship from American Instrument Exchange?
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements.
Return and order cancellation policy
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer's satisfaction during the warranty period. Customers who cancel orders after refurbishing has begun will be subject to a cancellation and restocking fee of between 20% and 40%.
Are discounts available for educational or non-profit institutions, or for bulk purchases?
Yes – call or email us today with a list of equipment you're looking for and we can potentially put together a quote that includes a discount.
How does your price matching policy work?
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we'll do our best to match or beat the price.
Can I see the equipment in person before committing to a purchase?
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Can I ship products that I purchased elsewhere to American Instrument for repair?
Yes – please see our repair services page for more information.
