BMT Incucell lab incubator

Brand : BMT

Product Code : SKU 3098A INC

Quantity

Price Match Policy

Shipping

All products ship from our 30,000 sq. ft. Haverhill, MA warehouse

BMT Incucell IC55 Laboratory Incubator (LSIS-B2V)

Precise temperature control and gentle, uniform heating are essential for microbiology, pharmaceutical quality control, environmental testing, food safety analysis, and research laboratories. The BMT Incucell IC55 Laboratory Incubator (LSIS-B2V) combines a 55-liter (2.0 cubic foot) chamber with natural gravity convection heating to provide stable incubation conditions while minimizing sample dehydration. Designed for routine laboratory use, the IC55 delivers dependable performance across a wide range of incubation applications in a compact benchtop footprint.

Unlike mechanical convection incubators that continuously circulate heated air with an internal fan, the Incucell IC55 utilizes natural gravity convection to create gentle airflow throughout the chamber. This design helps preserve moisture in agar plates and other sensitive samples while maintaining excellent temperature uniformity. Operating from Ambient +5°C to 100°C, the incubator is well suited for microbiology, pharmaceutical quality control, environmental testing, water analysis, and general laboratory incubation. Purchasing a refurbished BMT Incucell IC55 from American Instrument Exchange allows laboratories to obtain premium European laboratory equipment at substantial savings compared with purchasing new equipment.

BMT Incucell IC55 Key Features

55 L (2.0 cu. ft.) chamber capacity
Natural gravity convection heating
Temperature range from Ambient +5°C to 100°C
Microprocessor controller with fuzzy logic regulation
Programmable temperature operation
Stainless steel AISI 304 chamber
Removable chamber for simplified cleaning
Rounded interior corners
Inner tempered glass door
Two adjustable stainless steel shelves included
Four shelf positions
Quiet, fanless operation
Gentle airflow helps minimize sample dehydration
115 V, 50/60 Hz operation
90-day warranty from American Instrument Exchange

Designed for Gentle, Uniform Laboratory Incubation

The BMT Incucell IC55 was engineered for laboratories requiring highly reproducible incubation without the turbulence created by mechanical air circulation. Its 55-liter chamber provides ample capacity for Petri dishes, culture tubes, media bottles, Erlenmeyer flasks, environmental samples, and quality control materials while maintaining stable chamber temperatures throughout extended incubation cycles.

The natural gravity convection heating system distributes warm air evenly without internal circulation fans, reducing airborne particle movement and helping preserve moisture within microbiological media. Combined with a microprocessor controller utilizing fuzzy logic regulation, the IC55 delivers dependable temperature stability with minimal overshoot during heating and rapid recovery following routine door openings.

Common Applications

The BMT Incucell IC55 is commonly used for:

Microbiology laboratories
Bacterial culture
Yeast and fungal culture
Pharmaceutical quality control
Food safety testing
Environmental testing
Water quality analysis
Clinical laboratories
Culture media incubation
Stability studies
Educational laboratories
General laboratory warming

Many laboratories pair the BMT Incucell IC55 with biosafety cabinets for aseptic sample preparation, centrifuges for sample processing, laboratory refrigerators for reagent storage, and ultra-low freezers for long-term sample preservation.

Ideal Laboratory Environments

The BMT Incucell IC55 is well suited for biotechnology companies, pharmaceutical manufacturers, hospitals, universities, environmental testing laboratories, food and beverage quality control facilities, industrial research organizations, and government laboratories requiring dependable gravity convection incubation.

Its compact footprint makes it an excellent choice for laboratories that require precise temperature control while conserving valuable bench space, whether as a primary incubator or a dedicated unit for specialized workflows.

Natural Gravity Convection for Sensitive Laboratory Samples

The defining feature of the BMT Incucell IC55 is its natural gravity convection heating system, which produces slow, gentle airflow throughout the chamber without the use of circulation fans. This design helps minimize evaporation from culture media, reduces airborne particle movement, and creates a stable incubation environment for microbiological cultures and other sensitive laboratory samples.

The fuzzy logic microprocessor controller continuously adjusts heating output to maintain precise chamber temperatures while minimizing overshoot during warm-up and recovery following door openings. The stainless steel AISI 304 chamber, removable interior, rounded corners, and inner tempered glass door simplify routine cleaning while providing long-term durability in demanding laboratory environments.

Sample Storage Recommendations

The 55-liter (2.0 cubic foot) chamber of the BMT Incucell IC55 provides an ideal incubation environment for laboratories processing microbiological cultures, pharmaceutical quality control samples, environmental specimens, and routine research materials. Its compact footprint makes it well suited for laboratories that require dependable incubation performance without sacrificing valuable bench space.

The chamber accommodates Petri dishes, agar plates, culture tubes, media bottles, Erlenmeyer flasks, environmental samples, and other laboratory containers requiring stable incubation temperatures. The incubator includes two adjustable stainless steel shelves with four available shelf positions, allowing users to configure the chamber for a variety of sample sizes while maintaining proper airflow throughout the interior.

For the best temperature uniformity, samples should be evenly distributed throughout the chamber with adequate clearance between shelves and chamber walls. The gravity convection heating system promotes gentle natural airflow, making the IC55 particularly well suited for microbiological applications where minimizing evaporation and preserving sample integrity are important.

Energy Efficiency and Operating Costs

The BMT Incucell IC55 utilizes a natural gravity convection heating system that operates without an internal circulation fan. This simple, reliable design reduces mechanical complexity while providing quiet operation and minimizing routine maintenance requirements.

The microprocessor controller with fuzzy logic regulation continuously monitors chamber temperature and automatically adjusts heating output to maintain stable operating conditions with minimal temperature overshoot. The insulated cabinet helps reduce energy consumption while supporting rapid temperature recovery following routine door openings.

Constructed with a durable AISI 304 stainless steel chamber, removable interior components, and rounded interior corners, the IC55 is designed for years of dependable laboratory service while simplifying routine cleaning and preventative maintenance.

BMT Incucell IC55 Laboratory Incubator (LSIS-B2V) Key Specifications

Specification	Details
Manufacturer	BMT
Model	Incucell IC55 (LSIS-B2V)
Incubator Type	Gravity Convection Laboratory Incubator
Chamber Capacity	55 L (2.0 cu. ft.)
Temperature Range	Ambient +5°C to 100°C
Heating System	Natural Gravity Convection
Controller	Digital Microprocessor with Fuzzy Logic Regulation
Chamber Material	AISI 304 Stainless Steel
Interior Dimensions	15.7" W × 14.6" D × 13.8" H
Exterior Dimensions	24.4" W × 26.8" D × 26.8" H
Shelves Included	2 adjustable stainless steel shelves
Shelf Positions	4
Inner Door	Tempered Glass
Electrical Requirements	115 V, 50/60 Hz
Maximum Input Power	0.7 kW
Approximate Weight	121 lb (55 kg)

Specifications are believed to be accurate but may vary depending on production date or factory-installed options. Please verify all specifications prior to purchase.

BMT Incucell IC55 Laboratory Incubator Frequently Asked Questions

What applications is the BMT Incucell IC55 designed for?

The IC55 is designed for microbiology, pharmaceutical quality control, food safety testing, environmental analysis, water quality testing, educational laboratories, and general laboratory incubation requiring precise temperature control and gentle heating.

Why choose a gravity convection incubator?

Gravity convection incubators circulate warm air naturally rather than with a mechanical fan. This gentle airflow helps reduce evaporation from agar plates and other moisture-sensitive samples while minimizing airborne particle movement within the chamber.

Can the IC55 be used for mammalian cell culture?

No. The IC55 is a general-purpose laboratory incubator and does not provide CO₂ concentration or humidity control required for mammalian cell culture. Tissue culture applications require a dedicated CO₂ incubator.

What is fuzzy logic temperature control?

The IC55 utilizes a microprocessor controller with fuzzy logic regulation that continuously adjusts heating output based on changing chamber conditions. This helps minimize temperature overshoot while maintaining highly stable incubation temperatures throughout extended laboratory procedures.

Is the incubator easy to clean?

Yes. The removable AISI 304 stainless steel chamber, rounded interior corners, removable shelves, and tempered glass inner door simplify routine cleaning and help laboratories maintain a clean incubation environment.

What laboratories commonly use the IC55?

The BMT Incucell IC55 is widely used in biotechnology companies, pharmaceutical manufacturers, hospitals, universities, environmental laboratories, food and beverage testing facilities, industrial quality control laboratories, and government research organizations.

Does the IC55 operate quietly?

Yes. Because it uses natural gravity convection instead of a fan-driven air circulation system, the incubator operates quietly while providing gentle, uniform heat distribution throughout the chamber.

Why purchase a refurbished BMT Incucell IC55 from American Instrument Exchange?

Purchasing a refurbished BMT Incucell IC55 from American Instrument Exchange provides laboratories with dependable European-built laboratory incubation equipment at substantial savings compared with purchasing new equipment. Combining a 55-liter chamber, natural gravity convection heating, fuzzy logic temperature control, and a durable AISI 304 stainless steel interior, the IC55 is an excellent choice for microbiology, pharmaceutical quality control, environmental testing, and general laboratory applications. Every incubator is inspected and tested prior to shipment and includes a 90-day warranty for added confidence.

Testing Procedures for Used and Refurbished Laboratory Incubators
Ensure Quality and Stability Before Use

Used and refurbished laboratory incubators from American Instrument Exchange are thoroughly tested to ensure optimal performance and temperature stability with laboratory safety standards. Each unit undergoes a detailed inspection and functionality assessment to meet the needs of research, clinical, and industrial labs.

Why Testing Used Laboratory Incubators Is Essential

Before a laboratory incubator is reintroduced into any work environment, it must be tested for:
• Temperature uniformity and accuracy
• Airflow and humidity control (if applicable)
• Door seal integrity and insulation effectiveness
• Electrical and safety system compliance

Comprehensive testing reduces the risk of culture loss, contamination, and equipment failure—especially critical in applications involving cell culture, microbiology, pharmaceutical research, and diagnostics.

Our multi-point testing protocol for used and refurbished incubators ensures reliability, safety, and performance across all models and brands.

Key Testing Procedures for Refurbished and Used Laboratory Incubators

1. Initial Visual Inspection
• Check for cosmetic damage, corrosion, and wear to exterior surfaces, door hinges, and gasket seals
• Inspect power cord, wiring, and display panel for any defects or signs of tampering
• Confirm that shelves, chamber components, and internal fixtures are present and undamaged

2. Functional Testing
• Power on the incubator and verify all display indicators and alarms function correctly
• Test door latch and seal mechanisms for proper closure and insulation
• Run basic temperature cycles to ensure the unit maintains stability over time

3. Temperature Accuracy and Uniformity Tests
• Test internal sensors and controllers using temperature probes
• Measure temperature consistency at multiple chamber locations over several hours
• Confirm that programmable temperature settings respond accurately

4. Airflow and Humidity Control (if applicable)
• Test internal fan operation and airflow distribution
• For humidified incubators, inspect and test humidity reservoirs, sensors, and control systems
• Check for condensation buildup and confirm environmental stability

5. Electrical Safety and Compliance Checks
• Ensure all electrical components are properly grounded
• Perform insulation resistance and leakage current tests
• Verify compliance with current electrical safety standards for laboratory equipment

6. Final Quality Assurance Checklist
• Perform full cycle testing at various temperature setpoints
• Document performance benchmarks and results

All refurbished incubators from American Instrument Exchange are backed by our commitment to quality and precision. With our strict testing procedures, you can rely on your incubator to deliver dependable results from day one.

Repair and Refurbishment Protocol for Used Laboratory Incubators
Performance and Quality from American Instrument Exchange

At American Instrument Exchange, every used laboratory incubator we sell goes through a repair and refurbishment protocol. Whether it’s a standard, CO₂, or refrigerated incubator, our goal is to restore each unit to laboratory-level performance—ensuring temperature accuracy, environmental stability, and long-term reliability in your lab.

Why Choose a Refurbished Laboratory Incubator from American Instrument Exchange?

• Fully tested for performance and safety
• Backed by a warranty
• Cost-effective alternative to new equipment
• Environmentally sustainable through reuse and restoration
• Refurbished by expert technicians with decades of lab equipment experience

Step-by-Step Refurbishment Protocol

Every incubator at American Instrument Exchange follows this comprehensive, multi-stage process:

1. Initial Intake & Inspection
• Visual inspection for cosmetic wear, corrosion, dents, or broken components
• Mechanical assessment of door hinges, gaskets, seals, and chamber components
• Document any missing parts or issues requiring repair or replacement

2. Cleaning and Decontamination
• Thorough internal and external cleaning using non-abrasive solutions
• Decontamination/cleaning of surfaces to remove biological, chemical, or particulate residue
• Cleaning of removable parts (e.g., shelves, trays, etc.)

3. Mechanical and Electrical Repair
• Repair or replacement of worn mechanical components such as door latches, fans, hinges, and seals
• Evaluation and repair of control panels, switches, thermostats, and displays
• Inspection and testing of wiring, fuses, relays, and power supplies

4. Environmental Control System Assessment
• For CO₂ incubators: CO₂ sensors, regulators, and gas delivery systems are tested
• For refrigerated incubators: compressors, condensers, and cooling systems are evaluated for performance and leaks
• Fan motors and airflow systems are tested to ensure uniform environmental conditions

5. Temperature and Sensor Testing
• All temperature sensors and controllers are tested using thermometers/probes
• Uniformity and accuracy tested at multiple chamber locations
• For humidified or CO₂ incubators, humidity and CO₂ stability are verified

6. Safety System Testing
• Test of over-temperature protection systems and alarms
• Evaluation of door sensors, safety interlocks, and power failure recovery

7. Final Quality Control and Documentation
• Full performance test run over 24 hours
• Validation of setpoints for temperature, CO₂ (if applicable), and humidity (if applicable)
• Final inspection and cleaning before packaging
• Complete service report

Trust the Experts at American Instrument Exchange

With over 50 years in the lab equipment industry, American Instrument Exchange is a trusted source for high-quality refurbished laboratory incubators. Our proven refurbishment protocol ensures every unit is reliable, accurate, and ready to meet the demands of your lab from day one.

Warranty Information

All used equipment sold by American Instrument Exchange is refurbished/reconditioned, tested to meet specifications, cleaned, and comes with a 90-day warranty from the date of shipment unless otherwise specified. New products include a warranty from the manufacturer. Your warranty is only valid if you have paid your invoice. If your invoice is over 30 days old, warranty work will not be performed until your invoice is paid in full. American Instrument Exchange is not liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products,

Exceptions include international sales and items that are agreed to be sold with a lesser warranty or items that are agreed to be sold “as is.”

Should there be visible shipping damage to packaging or concealed shipping damage to item(s) supplied, buyer must communicate such damage to the delivering entity or carrier upon receipt first and to American Instrument the same day item is accepted / signed for. Failure to do so voids warranty. Customer decision to involve / procure third party or OEM service other than American Instrument or AIE assigned vendors to resolve in-warranty instrument failure or defect without first placing a service call to American Instrument voids warranty.

Return & Cancellation Policy

American Instrument Exchange will authorize the return of and issue a full refund for any equipment that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by AIE or a representative of AIE during the warranty period. Returns without prior authorization and an RMA number will not be accepted.

Customers are responsible for proper packaging of the equipment and all included accessories. American Instrument will pay for insurance and shipping costs. Non-inventory items bought specifically to fill customer orders may possibly be returned, but on a case by case basis.

Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues may be subject to a Restocking/Cancellation Fee of 20% or more and responsible for shipping costs for both the delivery and return.

Ongoing and Extended Support Options

American Instrument Exchange is able to provide additional repair and support services outside the warranty terms for most products that sell.

For biosafety cabinets, clean benches, chemical fume hoods, and other clean air products our team at AIE Laboratory Services can provide certifications, repairs, decontaminations, and other services for customers throughout New England, and guidance and limited technical assistance for any customers in the US and Canada for new or refurbished biosafety cabinets purchased from American Instrument Exchange.

For all other products, the repair service team at American Instrument Exchange can provide both field and depot repair evaluations. We can easily schedule and coordinate the pick-up and transportation of your malfunctioning equipment. By offering hourly rates lower than most OEM service providers and eliminating travel time for technicians, we help reduce repair costs. Furthermore, our lab depot repair service minimizes or eliminates scheduling delays. Our experienced service technicians are qualified to restore your equipment to factory specifications.

Please contact our team at info@americaninstrument.com for more details.

FAQ

Does the equipment come with a warranty?

Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer's specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.

How do you test and recondition the equipment?

Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly.

How do products ship from American Instrument Exchange?

We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements.

Return and order cancellation policy

American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer's satisfaction during the warranty period. Customers who cancel orders after refurbishing has begun will be subject to a cancellation and restocking fee of between 20% and 40%.

Are discounts available for educational or non-profit institutions, or for bulk purchases?

Yes – call or email us today with a list of equipment you're looking for and we can potentially put together a quote that includes a discount.

How does your price matching policy work?

We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we'll do our best to match or beat the price.

Can I see the equipment in person before committing to a purchase?

Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.

1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.

Can I ship products that I purchased elsewhere to American Instrument for repair?

Yes – please see our repair services page for more information.