
Eppendorf 5427R with FA-45-48-11 Rotor
FULLY TESTED & WARRANTIED*
Shipping
All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
FULLY TESTED & WARRANTIED*
Shipping
All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
Eppendorf 5427R Refrigerated Microcentrifuge with FA-45-48-11 Rotor
Eppendorf Centrifuge 5427 R is a high-speed, refrigerated microcentrifuge for high-throughput research. It doubles your tube capacity compared to a standard 24-place microcentrifuge thanks to its 48-place double-row rotor, while contributing to a more sustainable lab environment with its natural refrigerant.
CLICK HERE to see the Eppendorf 5427 R refrigerated microcentrifuge on our YouTube channel
The refrigerated microcentrifuge Centrifuge 5427 R was designed with high-throughput research applications in mind. With its aerosol-tight 48-place rotor it handles even the toughest challenges in a safe and reliable manner to provide you with the efficiency boost you need. With speeds of up to 25,001 x g, this microcentrifuge is fast enough for all your molecular biology applications. All aerosol-tight rotors are equipped with the Eppendorf QuickLock lids for easy rotor lid opening and closing to enable safe centrifugation of hazardous samples.
Centrifuge 5427 R is the first Eppendorf centrifuge with hydrocarbon cooling. Hydrocarbons (HC) are also known as green or natural coolants. The two most commonly used representatives are propane and ethane (known as R290 and R170, respectively). The GWP of HC cooling liquids are more directly equivalent to CO2. R290 is a commonly used cooling liquid in large commercial cooling systems. Due to their superior efficiency and performance, the amount of green cooling liquids used is significantly lower than that of a similar system with classic cooling by HFCs. Due to these advantages, R290 and R170 are both on the SNAP (Significant New Alternatives Policy Program for substitution of ozone-depleting substances by EPA) list for approved coolants for usage in refrigerated laboratory instruments such as centrifuges or even ULT freezers.
The 5427 R is compatible with different rotors (available directly through Eppendorf).
Our technicians test the performance of all centrifuges and make sure the rotating assembly is properly balanced; the bearings, seals and gaskets on the spindle assembly are in good shape; and the controls work properly. If the centrifuge is refrigerated, we also test to make sure that the machine reaches and holds temperature properly. All tolerances are measured and the exterior and interior of all units are fully cleaned. If the unit is being purchased with a rotor, we test the rotor/centrifuge combination together, including any buckets, gaskets and overspeed disks. Fixed angle rotors are closely inspected for body integrity, and swinging bucket rotors supplied with buckets are checked for proper weight distribution.
The photos above are representative. Please bear in mind that the equipment shown is currently in storage in our warehouse and that in addition to testing each machine we will clean all the equipment thoroughly prior to shipment. We often have multiple units of each model in stock and sometimes we're unable to feature photos of every single unit. At your request, we can provide photos of the equipment in your order after it has been tested and cleaned.
Eppendorf 5427R Refrigerated Microcentrifuge with FA-45-48-11 Rotor – Specifications
Dimensions | 12.6”W x 21.3”D x 10”H |
Capacity | 48 x 2 mL |
Speed range | 100 - 16,220 rpm (50 rpm steps) |
Max RCF | 25,001 × g |
Temperature range | -11 °C to 40 °C |
FastTemp - quick pre-cooling | from ~ 23 °C to 4 °C in only 11 minutes |
Timer range | 5 s to 9:59 h |
Electrical requirements | 120 V, 50 / 60 Hz |
Weight | 66 lbs |
Call 978-521-2221 or email us today for pricing and availability for the Eppendorf 5427R Refrigerated Microcentrifuge with FA-45-48-11 Rotor.
Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer’s specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly. While we may not be able to test for specific analytical applications we do our best to simulate the conditions under which the equipment will be used in your lab. If you have particular testing requirements please let us know and we’ll work with you to make sure these are addressed during testing.
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements. In many cases we can offer inside delivery. Customers are also welcome to make pick-up arrangements using their own preferred carrier.
All shipments are FOB Haverhill, MA. American Instrument Exchange will take reasonable steps to protect the equipment during shipment and the equipment will be fully insured. The customer will be charged for all shipping and handling charges, and fees incurred in the process of delivering the order.
For local customers in and around New England we can offer shipping and delivery using a local moving company trained by our staff to handle and deliver lab equipment. Our local movers can provide either standard dock-to-dock delivery or bring the equipment into your lab and set it in place.
Prior to signing the POD (Proof of Delivery), you are responsible for inspecting the goods for any damage. You MUST note any damage on the POD prior to letting the driver leave. This is to protect you, the receiver of the goods in the unlikely event of any damage. Once you sign the POD free and clear from damage, the goods are then deemed delivered in good order and no further claims would be applicable. This is the standard for all transportation so we want to protect you, our valued client.
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by American Instrument or a technician hired by/vetted by American Instrument Exchange’s during the warranty period. The customer will be responsible for proper packaging of the equipment and all included accessories.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues will be subject to a cancellation and restocking fee of between 20% and 40% and responsible for the full total of the shipping & handling costs for both the delivery and the return of the equipment.
Yes – call or email us today with a list of equipment you’re looking for and we can potentially put together a quote that includes a discount.
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we’ll do our best to match or beat the price.
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Yes – please see our repair services page for more information.