All products ship from our 30,000 sq. ft. Haverhill, MA warehouse
Labconco Purifier Logic 4’ Class II Type B2 Biosafety Cabinet – Refurbished
The Labconco Purifier Logic 4’ Class II Type B2 biosafety cabinet is designed to provide personnel, product, and environmental protection for laboratory procedures requiring total exhaust containment and contamination-controlled airflow. Commonly used for microbiology, cell culture, pharmaceutical preparation, antineoplastic drug preparation, and biological research workflows, this refurbished Labconco Type B2 biosafety cabinet is appropriate for laboratories requiring a fully exhausted cabinet configuration.
At American Instrument Exchange, each biosafety cabinet is inspected and tested by our technicians prior to shipment. Unless otherwise specified, new HEPA filters are installed at our facility before delivery.
Labconco Purifier Logic 4’ Class II Type B2 Key Features
Class II Type B2 biosafety cabinet
4-foot workspace configuration
Total exhaust design with 100% exhausted air
8-inch sash opening
90-day warranty included from American Instrument Exchange
Includes new HEPA filters
Designed for personnel, product, and environmental protection
Suitable for BSL-1, BSL-2, and BSL-3 containment applications when properly installed and certified
Appropriate for antineoplastic drug preparation and workflows requiring total exhaust
Refurbished and tested by American Instrument Exchange
Labconco Purifier Logic 4’ Class II Type B2 Overview
The Labconco Purifier Logic 4’ Class II Type B2 biosafety cabinet is a total exhaust biological safety cabinet designed for laboratory environments requiring contamination control, sterile airflow, operator protection, and full exhaust of cabinet air through a properly connected facility exhaust system. Unlike Class II Type A2 biosafety cabinets, which recirculate a portion of filtered air back into the laboratory, Type B2 cabinets exhaust 100% of cabinet air to the outside through a dedicated exhaust connection.
This cabinet configuration is commonly used for laboratory procedures involving hazardous particulates, biological materials, antineoplastic drug preparation, and applications where a total exhaust airflow design is required by laboratory protocols or facility safety standards.
Labconco Purifier Logic cabinets are widely used in biotechnology, pharmaceutical, clinical, hospital, academic, and government research laboratories because of their ergonomic design, airflow control systems, and laboratory-focused containment performance. Features may include stainless steel interior surfaces, angled sash design, airflow monitoring, bright interior lighting, and ergonomic workspace configuration depending on the specific unit.
Because this is a Type B2 biosafety cabinet, buyers should confirm exhaust compatibility, facility ductwork requirements, and certification requirements before installation.
Labconco Purifier Logic 4’ Class II Type B2 Common Applications
The Labconco Purifier Logic 4’ Type B2 biosafety cabinet is commonly used for laboratory procedures requiring sterile airflow, biological containment, and total exhaust operation. Typical applications include microbiology workflows, cell culture procedures, tissue culture applications, biological sample handling, pharmaceutical preparation, antineoplastic drug preparation, and work with agents requiring Biosafety Level 1, 2, or 3 containment when used in an appropriate laboratory setting.
This cabinet may also be appropriate for laboratories working with materials or procedures where recirculation is not desired and total exhaust through a dedicated building exhaust system is required.
Labconco Purifier Logic 4’ Class II Type B2 Ideal Laboratory Environments
This biosafety cabinet may be suitable for pharmaceutical laboratories, hospital pharmacies, oncology preparation areas, biotechnology laboratories, academic research institutions, clinical laboratories, government research facilities, and cleanroom or containment-focused laboratory environments.
Its Type B2 total exhaust configuration makes it especially relevant for facilities that require a fully exhausted biosafety cabinet for certain pharmaceutical, biological, or contamination-sensitive workflows.
Labconco Purifier Logic 4’ Class II Type B2 Key Specifications
Specification
Details
Manufacturer
Labconco
Model
Purifier Logic 0883FFF / Catalog No. 3461001
Cabinet Class
Class II Type B2
Nominal Width
4 ft
Exhaust Configuration
100% exhausted air / total exhaust
Sash Opening
8 in
Exterior Dimensions
54.31” W × 31.21” D × 61.4” H
Interior Worksurface Dimensions
48.5” W × 17.59” D × 29.2” H
Electrical Requirements
115V, 60 Hz
Included Accessories
New HEPA filters
Warranty
90-day warranty
Condition
Refurbished
Labconco Purifier Logic 4’ Class II Type B2 Refurbishment and Testing
American Instrument Exchange has extensive experience refurbishing used biosafety cabinets for laboratory and cleanroom environments.
Each biosafety cabinet is inspected by our technicians to verify proper blower operation, control functionality, airflow performance, lighting operation, cabinet integrity, and overall system condition prior to shipment. Unless otherwise specified, new HEPA filters are installed at our facility before delivery.
Testing procedures include major elements associated with biosafety cabinet certification to help support certification readiness upon installation at your facility. Because this is a Type B2 total exhaust cabinet, final installation should include confirmation of exhaust connection, airflow performance, and certification by qualified field technicians.
Certification Readiness
Biosafety cabinets should be certified by qualified field technicians after installation and before laboratory use. This is especially important for Class II Type B2 biosafety cabinets because they must be connected to an appropriate exhaust system and verified for proper inflow, downflow, and exhaust performance.
American Instrument Exchange performs functional testing prior to shipment to support certification readiness upon arrival. Buyers should confirm facility compatibility, electrical requirements, exhaust requirements, airflow specifications, and certification standards prior to installation.
Certification services are available through our affiliate company, https://www.aielaboratoryservices.com, which provides biosafety cabinet certification, testing, and field service support.
Certification requirements may vary depending on laboratory protocols, facility standards, cabinet installation, and application requirements.
Shipping and Installation Considerations
Biosafety cabinets are oversized laboratory instruments that may require special handling during transportation, delivery, and installation. Buyers should confirm laboratory access dimensions, doorway clearances, electrical compatibility, exhaust ducting requirements, and final cabinet placement before shipment.
Because this Labconco Purifier Logic is a Class II Type B2 total exhaust cabinet, installation should be coordinated with facility engineering, safety personnel, or a qualified biosafety cabinet service provider to verify ductwork compatibility and certification requirements.
Depending on the installation environment, liftgate delivery, inside delivery services, rigging assistance, or coordinated facility access may be recommended.
Labconco Purifier Logic 4’ Class II Type B2 Frequently Asked Questions
Is this Labconco Purifier Logic cabinet a Type A2 or Type B2 biosafety cabinet?
This unit is a Class II Type B2 biosafety cabinet. Type B2 cabinets are total exhaust cabinets designed to exhaust 100% of cabinet air through an appropriate facility exhaust system.
What does total exhaust mean on a Type B2 biosafety cabinet?
Total exhaust means that the cabinet exhausts all air from the cabinet rather than recirculating a portion of filtered air back into the laboratory. This configuration requires connection to a properly designed exhaust system.
What size is this Labconco Purifier Logic biosafety cabinet?
This is a 4-foot biosafety cabinet with exterior dimensions of approximately 54.31” W × 31.21” D × 61.4” H and interior dimensions of approximately 48.5” W × 17.59” D × 29.2” H.
What applications is this Type B2 biosafety cabinet commonly used for?
Typical applications include microbiology workflows, cell culture procedures, biological sample handling, pharmaceutical preparation, antineoplastic drug preparation, and work requiring BSL-1, BSL-2, or BSL-3 containment in an appropriate laboratory setting.
Does this biosafety cabinet include new HEPA filters?
Yes. Unless otherwise specified, new HEPA filters are installed by American Instrument Exchange technicians prior to shipment.
Does this cabinet require external exhaust?
Yes. As a Class II Type B2 total exhaust biosafety cabinet, this unit must be connected to an appropriate facility exhaust system and certified after installation.
Does this biosafety cabinet include a warranty?
Yes. A 90-day warranty from American Instrument Exchange is included.
Can the cabinet be certified after installation?
The cabinet is tested prior to shipment to support certification readiness upon installation. Final certification should be completed by qualified field technicians after installation and exhaust connection.
CLICK HEREto see the Labconco Purifier Logic 3461001 4' B2 total exhaust biosafety cabinet on our YouTube channel
Testing Procedures for Used and Refurbished Biosafety Cabinets
Ensure Containment, Airflow Integrity, and Operator Safety
Used and refurbished biosafety cabinets (BSCs) from American Instrument Exchange are thoroughly tested to ensure they meet NSF/ANSI 49 performance standards for containment, airflow uniformity, and HEPA filtration. Each Class I, II, or III unit is evaluated through a series of specialized inspections and certifications, ensuring the cabinet performs reliably in research, clinical, and pharmaceutical lab environments.
Why Testing Used Biosafety Cabinets Is Essential
Before any biosafety cabinet is deployed in a working lab, it must be tested for:
• HEPA filter integrity and leak-free performance
• Inflow and downflow air velocity balance
• Containment efficiency and personnel protection
• Electrical system function and safety compliance
• Cleanliness and readiness for sterile applications
Proper testing of refurbished biosafety cabinets helps prevent cross-contamination, exposure to hazardous materials, and airflow disruption—critical for maintaining laboratory protocols. Our structured multi-point BSC testing protocol ensures dependable protection for operators, products, and the lab environment.
Key Testing Procedures for Refurbished and Used Biosafety Cabinets
1. Initial Visual Inspection
• Inspect exterior panels, window sashes, hinges, and seals for signs of wear or damage
• Confirm visibility and integrity of the viewing window
• Check power cords, display screens, and control interfaces for usability
2. Cabinet Decontamination and Cleaning
• Interior and exterior cleaned with non-corrosive disinfectants
• Decontamination protocols followed to remove biological contaminants
• Work surface, sidewalls, and return air grills are fully sanitized
• Conduct aerosol challenge test using PAO or DOP to verify HEPA filter seal integrity
• Identify and resolve any filter leaks in accordance with NSF/ANSI 49 standards
• Ensure HEPA filters are correctly seated and uncompromised
4. Inflow and Downflow Velocity Testing
• Measure air velocities using calibrated thermo-anemometers
• Confirm inflow velocity meets requirements
• Verify downflow uniformity within the work zone to prevent turbulence and contamination
5. Airflow Smoke Pattern Testing
• Conduct visual smoke tests to demonstrate laminar airflow and containment
• Confirm that airflow barriers prevent cross-contamination and exposure
6. Electrical Safety and Alarm System Checks
• Inspect grounding, insulation resistance, and GFCI protection
• Test alarm functionality for sash position, airflow disruption, and power failure
• Verify interior lighting, outlets, and blower controls operate reliably
7. Final Certification and Quality Assurance
• Run full performance test cycle and confirm compliance with NSF/ANSI 49 and manufacturer specs
• Document data and generate a detailed service report
Guaranteed Performance from American Instrument Exchange
All refurbished biosafety cabinets from American Instrument Exchange are tested and verified to ensure maximum containment, user protection, and airflow performance. Whether used for microbiology, tissue culture, pharmaceutical compounding, or other work necessitating containment, our BSCs meet industry standards—so your team can work safely and confidently from day one.
Repair and Refurbishment Protocol for Used Biosafety Cabinets
Certified Protection and Performance from American Instrument Exchange
At American Instrument Exchange, every used biosafety cabinet (BSC) we offer is thoroughly repaired and refurbished to meet the highest standards for safety, airflow performance, and compliance. Whether it’s a Class I, Class II Type A2/B2, or Class III unit, we follow a meticulous refurbishment process to ensure your BSC provides reliable containment, sterile workspace conditions, and long-term durability.
Why Choose a Refurbished Biosafety Cabinet from American Instrument Exchange?
Fully tested and certified for airflow integrity and containment
Backed by warranty and performance guarantee
Cost-effective alternative to new biosafety cabinets
Environmentally responsible through expert reuse and restoration
Serviced by experienced technicians trained in NSF/ANSI 49 protocols
Step-by-Step Refurbishment Protocol
Every biosafety cabinet at American Instrument Exchange undergoes the following comprehensive multi-stage process to ensure it is lab-ready:
1. Initial Intake & Inspection
• Visual inspection of cabinet exterior, control panel, and sash mechanism
• Evaluation of hinges, seals, gaskets, and electrical components
• Missing parts or functional issues are documented for repair
2. Cleaning and Decontamination
• Full internal and external cleaning using non-abrasive, disinfectant-safe products
• Decontamination protocols followed to remove biohazardous or chemical residue
• Removable surfaces, work trays, and grilles are cleaned and sanitized
3. Mechanical and Electrical Repair
• Repair or replacement of worn components, including sash latches, lighting, and controls
• Electrical systems including switches, alarms, and outlets are tested and serviced
• Wiring is inspected and repaired to meet safety and performance standards
4. HEPA Filter Evaluation and Replacement
• Filters are tested for integrity using DOP/PAO aerosol challenge testing
• HEPA filters are replaced with OEM or equivalent filters
• Filter seals are verified for leak-free performance
5. Airflow and Performance Testing
• Inflow and downflow velocities are measured using calibrated instruments
• Smoke pattern testing confirms laminar airflow and containment effectiveness
• Blower motor function and airflow uniformity are verified across the cabinet
6. Safety System Verification
• Alarms for airflow disruption, sash height, and power loss are tested
• GFCI protection, lighting, and emergency shutoff systems are confirmed functional
7. Final Quality Control and Certification
• Performance testing is conducted to confirm NSF/ANSI 49 compliance (where applicable)
• Final visual inspection and cleaning performed prior to shipping
• Detailed service report and airflow test results provided with each unit
Trust the Experts at American Instrument Exchange
With over 50 years of experience in the lab equipment industry, American Instrument Exchange is a trusted name in refurbished biosafety cabinets. Our repair and refurbishment protocol ensures each cabinet provides dependable protection for personnel, products, and the environment—delivering maximum safety at a fraction of the cost of new.
Warranty Information
All used equipment sold by American Instrument Exchange is refurbished/reconditioned, tested to meet specifications, cleaned, and comes with a 90-day warranty from the date of shipment unless otherwise specified. New products include a warranty from the manufacturer. Your warranty is only valid if you have paid your invoice. If your invoice is over 30 days old, warranty work will not be performed until your invoice is paid in full. American Instrument Exchange is not liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products,
Exceptions include international sales and items that are agreed to be sold with a lesser warranty or items that are agreed to be sold “as is.”
Should there be visible shipping damage to packaging or concealed shipping damage to item(s) supplied, buyer must communicate such damage to the delivering entity or carrier upon receipt first and to American Instrument the same day item is accepted / signed for. Failure to do so voids warranty. Customer decision to involve / procure third party or OEM service other than American Instrument or AIE assigned vendors to resolve in-warranty instrument failure or defect without first placing a service call to American Instrument voids warranty.
Return & Cancellation Policy
American Instrument Exchange will authorize the return of and issue a full refund for any equipment that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by AIE or a representative of AIE during the warranty period. Returns without prior authorization and an RMA number will not be accepted.
Customers are responsible for proper packaging of the equipment and all included accessories. American Instrument will pay for insurance and shipping costs. Non-inventory items bought specifically to fill customer orders may possibly be returned, but on a case by case basis.
Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues may be subject to a Restocking/Cancellation Fee of 20% or more and responsible for shipping costs for both the delivery and return.
Ongoing and Extended Support Options
American Instrument Exchange is able to provide additional repair and support services outside the warranty terms for most products that sell.
For biosafety cabinets, clean benches, chemical fume hoods, and other clean air products our team at AIE Laboratory Services can provide certifications, repairs, decontaminations, and other services for customers throughout New England, and guidance and limited technical assistance for any customers in the US and Canada for new or refurbished biosafety cabinets purchased from American Instrument Exchange.
For all other products, the repair service team at American Instrument Exchange can provide both field and depot repair evaluations. We can easily schedule and coordinate the pick-up and transportation of your malfunctioning equipment. By offering hourly rates lower than most OEM service providers and eliminating travel time for technicians, we help reduce repair costs. Furthermore, our lab depot repair service minimizes or eliminates scheduling delays. Our experienced service technicians are qualified to restore your equipment to factory specifications.
Yes, all equipment from American Instrument Exchange comes with a warranty. Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer's specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.
How do you test and recondition the equipment?
Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality. We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly.
How do products ship from American Instrument Exchange?
We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements.
Return and order cancellation policy
American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer's satisfaction during the warranty period. Customers who cancel orders after refurbishing has begun will be subject to a cancellation and restocking fee of between 20% and 40%.
Are discounts available for educational or non-profit institutions, or for bulk purchases?
Yes – call or email us today with a list of equipment you're looking for and we can potentially put together a quote that includes a discount.
How does your price matching policy work?
We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we'll do our best to match or beat the price.
Can I see the equipment in person before committing to a purchase?
Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.
1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.
Can I ship products that I purchased elsewhere to American Instrument for repair?
Yes – please see our repair services page for more information.
