Beckman Coulter Allegra V-15R Refrigerated Centrifuge

by Beckman Coulter

SKU 1264M CENTRI

FULLY TESTED & WARRANTIED*

Quantity

Shipping

All products ship from our 30,000 sq. ft. Haverhill, MA warehouse

Contact Us

Call 978-521-2221
to request information & pricing for item 1264M CENTRI

Beckman Allegra V-15R Refrigerated Benchtop Centrifuge with VS 4.750-Hex Swinging Bucket Rotor - LIKE NEW CONDITION!

The Beckman Allegra V-15R refrigerated centrifuge adds versatility to your bench. This compact unit reaches speeds up to 13,500 rpm and generates a gravitational force of up to 20,412 x g, with 10 rotor configurations available. However, this unit includes the Beckman VS 4.750 Rotor, offering a maximum speed of 4,700 rpm and a gravitational force of up to 4,478 x g.

Specifications

Catalog number: C63128
Temperature range: -10° to 40°C
Max capacity: 4 x 750 mL
Max speed: 4700 rpm @ 4478 x g with included rotor
90-day warranty

Features

The Allegra V-15R is perfect for labs needing faster, longer sample spins without overheating. Its compact design, 28% smaller than similar models, saves valuable benchtop space.

To enhance safety, the V-15R includes automatic rotor recognition, cycle count, and a built-in imbalance sensor. Biosafe rotors and covers protect the centrifuge, your samples, and, most importantly, you.

Accordingly, with 50 programmable runs and an easy-to-use interface featuring illuminated buttons, operation is simple and seamless. The soft-close lid and low-profile design minimize effort, while quiet operation at ≤56 dBA ensures a peaceful workspace. The Allegra V-15R maintains a consistent temperature, allowing faster, longer spins without overheating. Rapid Temp and Eco Mode further increase efficiency and functionality.

Testing

This used and reconditioned Beckman Allegra V-15R Refrigerated Centrifuge undergoes thorough testing by our technicians. They ensure the rotating assembly is properly balanced, while checking the bearings, seals, and gaskets on the spindle for good condition. Additionally, they verify that all controls function correctly.

For refrigerated units, we also test to confirm that the centrifuge reaches and maintains the correct temperature. All tolerances are carefully measured, and both the interior and exterior are fully cleaned. If the unit includes a rotor, we test the rotor and centrifuge combination together to ensure optimal performance.

Beckman Allegra V-15R - Additional Specifications

Dimensions with lid closed	23.8”W x 25”D x 15.4”H
Capacity of included rotor	4 x 750mL
Max speed of included rotor	4700 rpm @ 4478 x g
Electrical requirements	208 V, 60 Hz
Weight	252.5 lbs

Pictures

The photos above represent our equipment, which is currently stored in our warehouse. Since we often stock multiple units of each model, we may not feature photos of every unit. However, if you request, we will provide photos of your specific equipment after we test and clean it.

For inquiries about the Beckman Allegra V-15R Refrigerated Centrifuge, call us at 978-521-2221 or fill out the form on this page.

Testing Procedures for Used and Refurbished Laboratory Centrifuges

Ensure Quality, Accuracy, and Compliance Before Deployment

Used and refurbished laboratory centrifuges from American Instrument Exchange undergo testing procedures to ensure they meet the performance, safety, and compliance standards required in modern laboratories.

Why Testing Used Laboratory Centrifuges Is Essential

Before a centrifuge is reintroduced into a lab environment, it must be tested for:

Mechanical integrity
Rotor balance and speed accuracy
Safety system functionality
Electrical compliance

Proper testing helps extend equipment lifespan, reduce downtime, and ensure safety in high-stakes lab environments such as clinical diagnostics, biotechnology, and research applications.

Our structured testing protocol for used and refurbished centrifuges ensures equipment safety, accuracy, and longevity.

Key Testing Procedures for Refurbished and Used Centrifuges

1. Initial Visual Inspection

Check for signs of wear, corrosion, or damage to housing, lid, and control panels
Inspect power cords, plugs, and connectors for fraying or exposed wiring
Confirm that the rotor and accessories are compatible and undamaged

2. Functional Testing

Power up the centrifuge and confirm successful boot-up of digital or analog displays
Test lid lock and emergency stop mechanisms
Run initial cycles at various speeds to check for abnormal noise or vibration

3. Rotor and Speed Verification

Test all programmable speed settings to confirm consistent acceleration and deceleration
Monitor temperature, vibration, and RPM consistency throughout the cycle
Balance testing ensures smooth operation and prevents wear on internal components

4. Electrical Safety and Grounding Tests

Verify that all electrical components are properly grounded and shielded

5. Temperature Control (if applicable)

For refrigerated centrifuges, test cooling function to ensure temperature stability within set ranges
Check refrigerant levels and inspect for compressor noise or failure

6. Final Quality Assurance Checklist

Conduct a full run-through using the user interface
Document all test results

Repair and Refurbishment Protocol for Used Laboratory Centrifuges

Certified Quality from American Instrument Exchange

At American Instrument Exchange, we follow a meticulous repair and refurbishment protocol to ensure that every used laboratory centrifuge we sell. We strive for reliable performance and long-term durability—providing labs with exceptional value on high-quality pre-owned centrifuges.

Why Choose a Refurbished Centrifuge from American Instrument Exchange?

Fully tested
Backed by warranty and performance guarantee
Cost-effective alternative to new lab equipment
Environmentally responsible through equipment reuse
Supported by expert technicians with decades of experience

Step-by-Step Refurbishment Protocol

Every used centrifuge at American Instrument Exchange goes through the following comprehensive repair and refurbishment process:

1. Initial Intake & Inspection

Our technicians perform a complete visual and mechanical inspection
Evaluation of hinges, seals, gaskets, and electrical components
Any physical damage, missing parts, or wear is documented for repair

2. Cleaning and decontamination

Full internal and external cleaning using non-abrasive, disinfectant-safe products
Biological or chemical residue is decontaminated/cleaned

3. Mechanical & Electrical Repairs

Damaged or worn parts (e.g., drive motors, lid latches, rotor buckets) are replaced or repaired
Electrical components, sensors, and fuses are tested and replaced as needed
Wiring is inspected for integrity and safety per industry standards

4. Rotor & Accessory Evaluation

All rotors, buckets, and adapters are inspected for cracks, corrosion, and balance
Non-conforming components are replaced with OEM or equivalent alternatives

5. Performance Testing

Rotor speed (RPM), acceleration, and deceleration are verified
Refrigerated centrifuges undergo temperature stability testing across set ranges

6. Safety System Verification

Lid lock and interlock systems are tested for proper function
Emergency stop and imbalance detection systems are verified
Electrical safety and grounding tests are conducted

Trust the Experts at American Instrument Exchange

With over 50 years of experience in the industry, American Instrument Exchange is a trusted name for refurbished lab equipment. Our centrifuge refurbishment protocol reflects our commitment to quality, safety, and customer satisfaction.

Warranty Information

All used equipment sold by American Instrument Exchange is refurbished/reconditioned, tested to meet specifications, cleaned, and comes with a 90-day warranty from the date of shipment unless otherwise specified. New products include a warranty from the manufacturer. Your warranty is only valid if you have paid your invoice. If your invoice is over 30 days old, warranty work will not be performed until your invoice is paid in full. American Instrument Exchange is not liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products,

Exceptions include international sales and items that are agreed to be sold with a lesser warranty or items that are agreed to be sold “as is.”

Should there be visible shipping damage to packaging or concealed shipping damage to item(s) supplied, buyer must communicate such damage to the delivering entity or carrier upon receipt first and to American Instrument the same day item is accepted / signed for. Failure to do so voids warranty. Customer decision to involve / procure third party or OEM service other than American Instrument or AIE assigned vendors to resolve in-warranty instrument failure or defect without first placing a service call to American Instrument voids warranty.

Return & Cancellation Policy

American Instrument Exchange will authorize the return of and issue a full refund for any equipment that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by AIE or a representative of AIE during the warranty period. Returns without prior authorization and an RMA number will not be accepted.

Customers are responsible for proper packaging of the equipment and all included accessories. American Instrument will pay for insurance and shipping costs. Non-inventory items bought specifically to fill customer orders may possibly be returned, but on a case by case basis.

Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues may be subject to a Restocking/Cancellation Fee of 20% or more and responsible for shipping costs for both the delivery and return.

Ongoing and Extended Support Options

American Instrument Exchange is able to provide additional repair and support services outside the warranty terms for most products that sell.

For biosafety cabinets, clean benches, chemical fume hoods, and other clean air products our team at AIE Laboratory Services can provide certifications, repairs, decontaminations, and other services for customers throughout New England, and guidance and limited technical assistance for any customers in the US and Canada for new or refurbished biosafety cabinets purchased from American Instrument Exchange.

For all other products, the repair service team at American Instrument Exchange can provide both field and depot repair evaluations. We can easily schedule and coordinate the pick-up and transportation of your malfunctioning equipment. By offering hourly rates lower than most OEM service providers and eliminating travel time for technicians, we help reduce repair costs. Furthermore, our lab depot repair service minimizes or eliminates scheduling delays. Our experienced service technicians are qualified to restore your equipment to factory specifications.

Please contact our team at info@americaninstrument.com for more details.

FAQ

Does the equipment come with a warranty?

Yes, all equipment from American Instrument Exchange comes with a warranty.
Used/reconditioned/refurbished equipment is tested to make sure it operates to the manufacturer’s specifications and comes with a 90-day warranty (unless otherwise noted). New equipment comes with a warranty from the manufacturer.

How do you test and recondition the equipment?

Testing requirements vary across all the equipment categories we sell. Temperature controlled units are tested with NIST traceable probes and data loggers. Gaskets, external housing, glass, handles, controls and control screens are all thoroughly inspected for integrity and functionality.
We test all equipment using the manufacturer's parameters and specifications to confirm that the unit operates properly. While we may not be able to test for specific analytical applications we do our best to simulate the conditions under which the equipment will be used in your lab. If you have particular testing requirements please let us know and we’ll work with you to make sure these are addressed during testing.

How do products ship from American Instrument Exchange?

We can ship products both nationally and internationally using a well-established network of transporters. Smaller items will ship via UPS. Larger equipment will be palletized and shipped either LTL or air-ride, depending on the specific equipment and/or delivery requirements. In many cases we can offer inside delivery. Customers are also welcome to make pick-up arrangements using their own preferred carrier.

All shipments are FOB Haverhill, MA. American Instrument Exchange will take reasonable steps to protect the equipment during shipment and the equipment will be fully insured. The customer will be charged for all shipping and handling charges, and fees incurred in the process of delivering the order.

For local customers in and around New England we can offer shipping and delivery using a local moving company trained by our staff to handle and deliver lab equipment. Our local movers can provide either standard dock-to-dock delivery or bring the equipment into your lab and set it in place.

Prior to signing the POD (Proof of Delivery), you are responsible for inspecting the goods for any damage. You MUST note any damage on the POD prior to letting the driver leave. This is to protect you, the receiver of the goods in the unlikely event of any damage. Once you sign the POD free and clear from damage, the goods are then deemed delivered in good order and no further claims would be applicable. This is the standard for all transportation so we want to protect you, our valued client.

Return and order cancellation policy

American Instrument Exchange will accept the return of any product that is not working as represented and could not be replaced or repaired to the customer’s satisfaction by American Instrument or a technician hired by/vetted by American Instrument Exchange’s during the warranty period. The customer will be responsible for proper packaging of the equipment and all included accessories.

Customers who cancel orders after refurbishing has begun or after delivery where there are no equipment performance issues will be subject to a cancellation and restocking fee of between 20% and 40% and responsible for the full total of the shipping & handling costs for both the delivery and the return of the equipment.

Are discounts available for educational or non-profit institutions, or for bulk purchases?

Yes – call or email us today with a list of equipment you’re looking for and we can potentially put together a quote that includes a discount.

How does your price matching policy work?

We strive to keep our pricing competitive and reasonable. If you find comparable items for sale at a lower price from other vendors please send us a link and or quote for the item and we’ll do our best to match or beat the price.

Can I see the equipment in person before committing to a purchase?

Customers are welcome to make an appointment to view equipment in our warehouse. Given our workload we may not be able to test or clean the equipment prior to your arrival if you have not committed to an order.

1023 Western Avenue is a working warehouse, not a showroom, and customers should dress appropriately and wear closed toe shoes.

Can I ship products that I purchased elsewhere to American Instrument for repair?

Yes – please see our repair services page for more information.